New member here with a big THANK YOU to the board members. Your information here was a big help to me deciding what to buy. Hope to provide the same help to others in the future. Eagle Alloy 114's 18x9.5 with a 6" backspace. Tires are Nitto 285/60/18. Very happy with the look and no rubbing issues at all. No adjustments at all to the T bars. Thanks again to all here.

Glad u like the tire/wheels set up, now u need to jump on the horsepower/smoke sliding board.

Are those the chrome or the super finish? Thats almost the exact set up i want...

Nice wheels...........You have good taste.

ABQ,
Are yours the super finish or the chrome? Also how much trimming to fit those tires?

Mine are the chrome finish. I had to trim a sliver of the bumper, some of the inside airdam lip and a decent amount from the inner fender in both in front and back of the wheel. I also have a 1/4" wheel spacer up front. The wheels use to rub BAD on the sway bar at a full turn. They still do now, but hardly noticeable. That 6" is a lot of backspacing.

They are the super finish.

So let it be written so let it be done...
Thanks for the posts guys, I will get pics of the 114s 18x9.5 with the 285/65/18 BFG ATs as soon as possible :)

Bring them on please! Lets see!

Reactor

After having these wheels and tires for a while are you still happy with them? Do you still have no rubbing issues? They look great and I was waiting for you to get some miles on them and give feedback before I order.
Thanks

Nice looking setup, Ive been looking at those rims & 325s, but think the 295/17s will be alittle cheaper. Its nothing but a dream right now, if anything it wont be until spring.

After 5 k miles, no problems with the wheels or tires. They do have a very slight inside rub when turned to the left, full lock. Only the right front will rub. Very minor rub on sway bar. So far the tires are quiet and ride fairly well. Overall I am pleased and would purchase again.