Dmax05
07-22-2005, 03:56 PM
I had an idea and was woundering if this is possible. I personaly think It might work.
Since EDGE and Banks plug inbetween the engine and the computer (wire harness) Couldnt you put both on at the same time? For example (dont get lost now) >> =connected to
Engine>> Factory male plug harness>>Female plug on EDGE>>EDGE>>Male plug on EDGE>>Female plug on Banks>>Banks>>>Male plug on Banks>>Factory Female plug>>D-max Computer...get it? got it? good, now will it work?
Thanks all
Matt
Scotty Seelen
07-22-2005, 04:28 PM
I haven't heard of anyone trying this before. It will probably cause more than a few problems.
lakingslayer
07-22-2005, 04:37 PM
Probably won't work well due to the timing modifications both do may not be good for the motor.
rolloffhill
07-22-2005, 05:45 PM
I had an idea and was woundering if this is possible. I personaly think It might work.
Since EDGE and Banks plug inbetween the engine and the computer (wire harness) Couldnt you put both on at the same time? For example (dont get lost now) >> =connected to
Engine>> Factory male plug harness>>Female plug on EDGE>>EDGE>>Male plug on EDGE>>Female plug on Banks>>Banks>>>Male plug on Banks>>Factory Female plug>>D-max Computer...get it? got it? good, now will it work?
Thanks all
Matt
Is it physically possibly, sure they will plug into each other, they are the same delphi plugs. Is it going to work?, prolly not......why don't you try it and report back to us..............
CntrlCalDmax
07-23-2005, 01:09 PM
I had an idea and was woundering if this is possible. I personaly think It might work.
Since EDGE and Banks plug inbetween the engine and the computer (wire harness) Couldnt you put both on at the same time? For example (dont get lost now) >> =connected to
Engine>> Factory male plug harness>>Female plug on EDGE>>EDGE>>Male plug on EDGE>>Female plug on Banks>>Banks>>>Male plug on Banks>>Factory Female plug>>D-max Computer...get it? got it? good, now will it work?
Thanks all
Matt
I tried the Edge with a Beta VA like this and it wasn't worth the time it took to install it. The VA at that time had some problems but I still don't think the harness/harness stacks would work well regardless of manufacturers.
Max Payne
07-23-2005, 02:15 PM
Not to mention you won't be able to close the hood with that many connectors sticking out):h
Dmax05
07-23-2005, 07:23 PM
A guy at the track said he did the stack (EDGE and Banks) He said for $400 you can get an adaptor and stack them both..but I did not see it nor do I know him. Anyone heard of a $400 adaptor?????
Thanks all
Matt