|
: Can't find LMM fender mod thread... D/AChris 08-11-2010, 12:25 PM Brother just bought some new wheels and tires for his '10 GMC LMM, going to need to do the fender mod NorCal did on a truck for more clearance. I've searched and searched, evidently I'm not typing in the right words. Anyone know where it is? Chris D/AChris 08-11-2010, 01:02 PM Nevermind, found it, inside Hendo's SEMA truck thread. Chris Nor-Cal Nick 08-12-2010, 08:31 PM Just so others that come across this here is the link >> http://www.dieselplace.com/forum/showthread.php?t=334605&page=8 crazycrew 08-20-2010, 01:32 PM This should be made a sticky or copy into the DIY as fender mod D/AChris 08-23-2010, 10:45 AM I just used this DIY info on my brothers '10 GMC LMM, fit some 305/65R17 Mickey Thompson ATZ's with 17x8's Helo759's -6 offset, with no cranking of the torsion bars. Wish it was done before I did my setup. I used a heat gun to persuade the plastic fender to conform to the new shape. Looks 100% factory! I'll get some pics of his and my truck together once the Bilstein shocks from AlligatorPerformance comes in this week. Chris Nor-Cal Nick 09-02-2010, 04:58 PM FYI, I put them in my sponsor zone on DP: STICKY: 07.5-2010 HD *LARGE* Fender mod (Step by step pics) (http://www.dieselplace.com/forum/showthread.php?t=387150) STICKY: 07.5-2010 HD *SMALL* Fender mod (Step by step pics) (http://www.dieselplace.com/forum/showthread.php?t=387151) towboattrash34 09-02-2010, 05:30 PM Got the back cleared, but the front rubs. Can't do anything for it as the washer fluid bottle is on driver side. Did not check passenger side. crazycrew 09-03-2010, 12:20 PM Did this on my 05 yesterday. Thanks NICK | ||