Twisted out another with the stock nose this time.

Many thanks to nick @ DuramaxTunner.com for coming on board as the official tuner for DuraBurb and for the cool DSP2 Tow/Hot tune that make this truck one hell of a tire fryer!!

Keeping the nose straight is the only challenge now.


http://i1018.photobucket.com/albums/af309/DuraBurb/65ce0b5c.jpg

how much does one of these run normally?

2007 are the best bet @ 50K or the TowPro with the 2500HD clip are 55K

So what do you do about the 2" lift on the 900 series and the front end?

I think it's a body lift...right?

Yep, well sort of. Since these SUV's have about 1.5" of forward rake (we all hate) and this swap loads the front suspension 1/2", it only makes sense to lift the front the 2” while retaining the stock position in the rear there by giving the SUV a level look. We use grade 8 bolts of progressive sizes and cut the pucks to custom sizes from UHMW.

As for the bumper we retool the front mount and then re-drill the holes for the pull loops in the lower valance.

We call this method the “DuraBurb reverse rake”, I should patented that LOL:D.