I have been looking into the Edge EZ but have not been able to find any pictures of the entire kit. I would like to get an idea of what the the switch and wiring look like so that I can decide how I am going to mount it.

Anybody have pictures to post?

It looks just like the regular Juice with Attitude minus the thermocouple and the Attitude. It has a toggle switch instead of the Attitude for 3 positions of power.

Go to Edge's website and look at their downloadable install instructions for pictures. Now, unless they've updated their info, you'll need to look at the instructions for F**d to see a picture of the level switch. They were supposed to correct the GM instructions to show the switch but may not have done so yet.

Edit: I just looked and it's as I said. You'll need to look at the F**d instructions to see a picture of the switch.
www.edgeproducts.com/pdf/instructions/EZC1100_EZ_Duramax_LLY_032105.pdf

Thanks for the help guys. I checked out the f**d instructions and saw the switch. Not real pretty but my goal is to hide it anyway.

Thanks again.

Falkirk,

Nearly all of our customer that have gotten the EZ from us leave the switch under the hood. You'll more than likely find a HP level you like and then leave it there after you wear the "new" off it etc. Call us if you have any qestions etc.

Mark @ DPPI

have had my ez about 3 weeks. mounted my toggle under the dash beside my brake controller in a pre existing hole. it is out of sight and out of the way. the box itself is mounted on top of the fuse box under the hood on the back just under the hood hinge. really like it.