Anyone running or have pictures of a 2500HD running 295/75R16 BFG AT KO tires?

Guess not! That seems like an odd size, have not seen anything posted before with that size, I don't recall anyway.


Good Luck, hopefully someone will reply

Yep, I'm running those tires. Just put them on a month ago. They required raising the height via the torsion bar adjusters, then an alignment. Nothing too terrible. I did have to do some strategic trimming on the inner wheel well liners to make some room.


I'll take some pics tonight when I get home. It's sunny and 70 again today so I rode to work! http://www.dieselplace.com/forum/smileys/Big Smile.gif

y2k here are thephotos of my 03 GMC http://www.dieselplace.com/forum/uploads/D97_1gmc.jpg

Here is what i trimmed on the airdam


I couldn't attach pics in the PM, no option?


http://www.dieselplace.com/forum/uploads/9C5_2gmc.jpgEdited by: Dmax Tim

If you have mud flaps be careful. I know my 285's come REAL close to those babies. If I was running 295's they would rub for sure. And I even have the green keys in my truck.

Thanks for the pictures Tim. I sent you another PM, just disregard the part about pictures unless you have more.

GassedRacing please post some pics when you get the chance. A little torsion bar crank and some minor trimming never hurt!

Any other takers???

Thanks Jim but I've got some room and they are still ok after 3 trucks.


If u don't tie wrap the left rear back it will rub but I got plenty of the HD wraps and this is one of my first fixes on all my new trucks.

Here is a quick link to my site showing the tires. The pics suck because I was snapping pics in my work parking lot at 7am and there was not enough light. I'll update later...


http://www.gassedracing.com/Gassed_DMax.aspx