Hi there,
I'm having serious trouble bleeding the slave because there is no nipple! Just a little offset with an allen screw at the end! Any tips on what the heck to do>!>!?

thats your bleed screw,take it out,hold your finger on the hole,let some one work the pedal slowly or let it bleed itself.

When i bled my blazer's clutch i found the easiest way to bleed it by myself was to take off the cap for the reservoir and crawl under the truck and push the clutch slave cylinder all the way in, slowly, by hand.

This will force the air out of the slave and up the line until it gets to the top of the fluid level and just creates a bubble that'll pop. Release the slave cylinder and let it return all the way out. repeat this a few times. Your done once you can close the system up and you've got a good clutch pedal feel.