Well Its time to order a lift pump and debating which one to buy... I like fass and like the single and double pump setup from kennedy, not too worried about the filter since I gonna build the setup with the CAT filter. si I would go with the twin kennedy ones or the single pump only from fass. or theres the raptor too but just thought I'd see what guys are running first. and what they like. thanks. Lee

I put the Air Dog 150 on mine. Like the compact unit with separate water filter and fuel filter. I also kept the factory fuel filter.

I don't think you can go wrong with any of the setups that you mention.

Here is a very popular and very good product....I purchased my setup from Nicktane.com

http://www.ttspowersystems.com/GM_Diesel_Fuel.html

Moved to Fuel System, Air, Exhaust, & Emissions Upgrades

I like the Raptor if you are not wanting filters. They are made by Pureflow who makes the AD.

Mitusa

Airdog II is what I just put on. Nice pump.

Airdog Mounts Bett Than The Fass Imo. They Are A Solid Pump And I Have Never Had An Issue. We Installed A Pallet Of Them Last Month

Mitusa


Thats the one I really want but who sells them for the dmax and how much? I heard that mike L was a dealer but have not checked with him yet.

Here is where to get the mitusa pumps.

http://www.opieparts.com/Products.htm

Just click on the contact us link and send him a message that you are interested in getting one of his pumps.

I just got one a couple weeks ago and love it.

Here is where to get the mitusa pumps.

http://www.opieparts.com/Products.htm

Just click on the contact us link and send him a message that you are interested in getting one of his pumps.

I just got one a couple weeks ago and love it.


Right on thanks, so how much was it? and whats all involved in putting one on?

Pretty straight forward to put on. Mount the pump and route the lines. One line comes from the bottom of the FICM (or the output) into the preassembled fittings then to the MITUSA pump. Then it runs out of the pump through the pre assembled fittings again to your stock fuel filter. I placed a filter between the FICM and MITUSA pump.

I paid 475 for the MITUSA and another 100 for an Aeromotive fillter to put inline be for the MITUSA.

Ppe Lift Pump : Half The Price
I Have Set Up With Pre Filter

I talked to opie yesterday he called after I sent him an email. this is the setup I'm gonna go with I like the simpleness of it and dont have to run any wiring or anything.

Kennedy duals is an excellent set up but it's been 2 yrs so perhaps there are competitive options now

Well no luck getting mitusa so wheres the best price to get Fass?

Kennedy duals is an excellent set up but it's been 2 yrs so perhaps there are competitive options now

I agree. Small little pumps that don't hang down below the frame and will supply the engine with all the fuel you need.

I'm almost done installing mine along with his mega filter. We'll see how it is when it's done. I can't wait.

I looked at Fass and Airdog but didn't like how they hung down below the frame. Plus I also liked the gear-less motor that are in kennedys.

just my $.02
yellowchevy

Yep I have looked at those as well what did you have into the whole system when you were done? are you using a CAT fuel filter or something different?

Anybody use the single filter FASS Platinium series pump? if so how do you like it and does it work well?

Yep I have looked at those as well what did you have into the whole system when you were done? are you using a CAT fuel filter or something different?

I bought a bunch of stuff from him at the time I got the lift pumps; mega filter, sending unit kit, injector, pump rub, fuel/tranny filters, injectors lines. etc.
I'll PM you.

I use the factory fuel filter as my first filter and then I use the mega filter as my second filter.

I got everything all hooked up on Saturday afternoon and had it running again. So I don't have any seat time on it yet.

Yellowchevy