staticx04
07-10-2005, 01:07 AM
It seems to be that the edge tops out at 25.6 psi on the boost. Is this off alittle? Should it be more? Or is this right. Cuz i'm considering buying a boost guage and gettin that as a back up. I am just curious?
|
antz01ta 07-10-2005, 09:54 AM stock map sensor is limited to 25.6 psi reading, boost will be higher than you are seeing on the edge. with my HJ i am seeing 34 psi at the manifold. Max Payne 07-10-2005, 07:32 PM The edge limits the boost reading to prevent overboost codes. A backup boost gauge is a good idea if you are going to be playing with things... Maxter 07-10-2005, 09:08 PM I doubt that the Edge limits the boost reading. Otherwise it would be faily simple to think a number and display another. I think it's limited by the ECU capability of reading the boost since it's the source of the attitude number. Frank Blum 07-10-2005, 11:39 PM With my Juice 4.61 version my analog gauge reads 26. Later! Frank antz01ta 07-11-2005, 06:13 AM stock map sensor is limited to 25.6 psi reading, boost will be higher than you are seeing on the edge. since you didnt read this the first time i posted it here it is again. Max Payne 07-11-2005, 09:03 AM Did you ever notice how some programs throw overboost codes? The Edge intercepts the reading and begins scaling it back at around 20 psi, to prevent overboost codes...That is why I have analog gauges also. Regardless of the factory sensor limits, the Edge reading is no longer useful above 20 psi... jmg343 07-13-2005, 03:12 PM i have the predator and an autometer boost gauge. highest i can get is like 23lbs. i think it should be higher. is something up? C.A.P 07-13-2005, 04:47 PM get a bighead and adjust the boost by twisting (shortning the arm) when I ran the predetor I was getting 28to 29 all day with 7 twists | ||