|
sdeters 05-31-2010, 12:08 PM I have a 2006 LB7 What is the oil capacity to change the oil. Is there a how to on this site? I am also looking for grease cert locations. Please point me in the correct direction. THanks I have done many searches and keep coming up empty handed. I have changes a gas motor oil but duramax engine I want to do it correctly tennykimble 05-31-2010, 12:19 PM it takes 2.5 gallons of oil. your operators manuals should tell you how. most of the grease fittings are on the steering components near the wheel (under the truck) .. good luck sdeters 05-31-2010, 12:35 PM Good Deal Thanks for the help I looked in the Diesel supplement but I could not see the amount of oil. I am going to use rotella for now and then maybe look at amsoil in the future jettech 05-31-2010, 12:37 PM it's like every other engine ever made. Pull the drain plug,change the filter, reinstall the plug and fill it. 2.5 gal (10 qts). 11 grease fittings total. wreedLBZ 05-31-2010, 12:37 PM 10 quarts. DMSkater 05-31-2010, 12:40 PM Hi sdeters, I had to get a special "Articulating Tip" for my grease gun, just to reach 2 or 3 of the Zerts up in the steering gear. Could not get to them with a standard straight tip. Harold Rader2146 05-31-2010, 02:03 PM Moved to Maintenance & Fluids. Assuming you have 4wd, 11 grease points. IIRC, 2wd has 7. http://www.dieselplace.com/forum/showpost.php?p=3861868&postcount=47 KevinsDMAX 05-31-2010, 03:18 PM I have a 2006 LB7 What is the oil capacity to change the oil. Is there a how to on this site? I am also looking for grease cert locations. Please point me in the correct direction. THanks I have done many searches and keep coming up empty handed. I have changes a gas motor oil but duramax engine I want to do it correctly You don't have an LB7, you either have an LLY, or LBZ. Just trying to help you out. Kevin wreedLBZ 05-31-2010, 03:21 PM Moved to Maintenance & Fluids. Assuming you have 4wd, 11 grease points. IIRC, 2wd has 7. http://www.dieselplace.com/forum/showpost.php?p=3861868&postcount=47 I have 11 stock on my 2wd. I now have 15 with my Cognito UCAs. 96GMC6.5L 05-31-2010, 03:23 PM You don't have an LB7, you either have an LLY, or LBZ. Just trying to help you out. Kevin You beat me to it. KevinsDMAX 05-31-2010, 04:34 PM I have a 2006 LB7 What is the oil capacity to change the oil. Is there a how to on this site? I am also looking for grease cert locations. Please point me in the correct direction. THanks I have done many searches and keep coming up empty handed. I have changes a gas motor oil but duramax engine I want to do it correctly You don't have an LB7, you either have an LLY, or LBZ. Just trying to help you out. Kevin Rader2146 05-31-2010, 05:17 PM You don't have an LB7, you either have an LLY, or LBZ. Just trying to help you out. Kevin You don't have an LB7, you either have an LLY, or LBZ. Just trying to help you out. Kevin Déjà Vu....:confused: Thanks for the correction, wreed. sdeters 05-31-2010, 11:00 PM Sorry Bout posting this in the wrong Forum. Yes I have a LBZ sorry for miss typing. Thanks for Showing the pics of all of the grease certs. That really helps me narrow them down. Off to buy an oil filter and oil. I will have to see how my small grease gun will work out. Thanks again sdeters 06-25-2010, 10:05 PM IS the Mobil TDT 5w 40 oil ok to use with the m1-303 oil filter in a 2006 LBZ engine? Thanks BHoward6.6 06-25-2010, 10:11 PM IS the Mobil TDT 5w 40 oil ok to use with the m1-303 oil filter in a 2006 LBZ engine? Thanks Yep, good stuf. Brad92 06-26-2010, 10:52 AM IS the Mobil TDT 5w 40 oil ok to use with the m1-303 oil filter in a 2006 LBZ engine? Thanks I use Mobil 1 oil in our vehicles.... I like it. sdeters 06-27-2010, 01:02 PM Where I work we use a lot of mobil oil. I like the mobil brand of oil. I am going to buy some. Thanks for the feeback | ||