|
: How many turns per inch of lift? Torque 07-09-2005, 11:29 AM I just had the Cognito leveling kit installed and the T-bars are cranked too high. I would like to drop the front end down about an inch. How many turns per inch of front end travel? I know I read it on this site, but I cannot find it. J. honeybearz 07-09-2005, 12:11 PM Just measure the height on each side where you want the one inch drop and crank them until your tape measure shows a one inch drop, pretty simple. dozerboy 07-09-2005, 03:49 PM Maybe 3-4 turns IIRC, but don't just go cranking on the tbars with your truck on the ground. Torque 07-09-2005, 08:30 PM I went ahead and made one full turn at a time and found that each full turn = 1/8 of an inch. In other words 1 inch = 8 turns. The truck is looking good. Pics to follow. J. Torque 07-10-2005, 08:48 PM Here she is... honeybearz 07-10-2005, 09:09 PM Nice truck! | ||