LonesomeT444E
05-26-2010, 02:17 PM
I have some spindles that need some attention. I have a need for a rethreading kit that handles everything from a trailer to a D50 from end. I would also like to be able to do the spindles on my ATV’s. I have poked around a bit at some of the kits on the internet. But to be honest I am confused by what all I looked up. I do not know the sizes I require and without being able to compare the size of the tools in the photograph with what I need them for I have no way of know for sure what I am looking at. Can I please get some guidance on this subject matter?
Silver65burb
06-22-2010, 02:03 AM
Need to get thread gage and mesure them, or mabey see what nut size fits on them from a part list
LonesomeT444E
06-22-2010, 07:57 AM
That is one issue I am running into with the traile I have to get repaired. The spindle nuts were missing when I got it. I have been peiceing the hubs back toegther since.
Silver65burb
06-22-2010, 04:59 PM
was trailer a home bilt trailer, any numbers on the bearing for getting size, spindels are normal x size or same od , get a thred pich gage with shaft size, and pich u can find the nut it needs
heymccall
06-22-2010, 05:36 PM
That is one issue I am running into with the traile I have to get repaired. The spindle nuts were missing when I got it. I have been peiceing the hubs back toegther since.
To the OP, if it's light thead issues, use a thread file. http://www.google.com/products/catalog?rlz=1T4GGLL_enUS383US383&q=thread+file+set&um=1&ie=UTF-8&cid=7044094621892137697&ei=zywhTOulI8WBlAed0clA&sa=X&oi=product_catalog_result&ct=result&resnum=4&ved=0CCwQ8wIwAw#
To the spindle nut poster, page B4 here http://www.redneck-trailer.com/2009/B.pdf
LonesomeT444E
06-23-2010, 10:24 AM
It is a military trialer. Locating the parts have been very challenging.
Joey D
06-27-2010, 04:10 PM
It is a military trialer. Locating the parts have been very challenging.
try www.100dollarman.com He sells tons of military stuff and parts out trailers for truck beds, he may be able to help you.
There is also Boyce equipment, they do a lot of military stuff and may also be able to help.
LonesomeT444E
06-27-2010, 10:35 PM
I have already called both of them and then some. This particular trialer is hard to get hub parts for. The bigger ones that people use when they bob dueces are easy.