Got the gauges installed this week, not hard at all took about 7hrs total to do it by myself oh and my 2yr old helped as well (he tries). The EGT goes up really fast or at least faster than I thought it would never above 1100 and was at WOT. Trans runs about 180*, and boost stays at 0:( most of the time, got it to 11psi for about 0.0005 seconds. So now I'm saving for the TURBO MASTER:ro) and was wanting to see if i could find some help with doing the Optic Bump. I'm not really sure how to do it, and don't won't to go to far since I don't have any type of scan tools to read live data. I don't know if i really need the scan tools for this or not. Either way I'm more than happy to meet someone (around Houston) where ever is easier for them, and I'll bring the beer :beerchug: or cokes what ever you want.

I'd come over and "bump" it, no problem. heck, if you want to make a turbo controller I can help with that, too.

Scanning your '94 is not a problem either.

So when does the QM road show get up here my way if ever again.
LOL :)

You work it out that he comes up from TX and I'll come over from Springfield, MO. My guess is that we might be able to get a heck of a get-together going... :-)

HEY I'm up for a road trip if need be

Did someone say "ROAD TRIP"? Hmmmm.... Pasadena could be within my limits!

QM Thanks alot, just let me know when you can and I'll make it no matter what. I'm always up for a road trip!!!!

CR, load'n up and let me know sounds like good reason to make some good old Texas BBQ. I don't have any Canadian beer but I bet I can get some Mexican Beer. LOL

I'm up for a diesel get together.

Sounds like fun, i'll be keeping you guys up to date on the holiday thread as we travel.