I have a 2009 GMC C5500 that I just got a PPE Xcelerator tuner for and I would like to install a boost and exhaust temp guage before I start playing with it. Does anyone know of an A Pillar guage pod available for this model?
I haven't been able to find one and don't have any room on the dash. I've thought about trying one for a pickup but I'm not sure it would fit even with some mods.

Any suggestions would be appreciated.

Thanks..... Doug

the make them. check with some of the vendors on this site. they can hook you up with what you need.

Look in my garage, all you need is a 4500-5500, 4x4 four hole gauge panel for your dash. It replaces the 2 hole and little storage hole!!

Look in my garage, all you need is a 4500-5500, 4x4 four hole gauge panel for your dash. It replaces the 2 hole and little storage hole!!

I have a 4x4 and an auxillary fuel tank guage in there so that panel is full.
That is why I am looking for an A Pillar mount.

Thanks..... Doug

Doug, I was hoping it would be easy like mine, sorry. I looked for a piller pod and never found any. good luck!! P.S. fill out your sig so we know what you have. Welcome to DP, there are alot of very smart guys on here with alot of great info. like to see some pics of your truck! have a great day!!

Alan

Doug, I was hoping it would be easy like mine, sorry. I looked for a piller pod and never found any. good luck!! P.S. fill out your sig so we know what you have. Welcome to DP, there are alot of very smart guys on here with alot of great info. like to see some pics of your truck! have a great day!!

Alan


Thanks, I just got on here today to check with some experts to see if they had any solutions. I'll have to get everything filled out and get some pictures posted. Thanks for your help.

Doug

i have been looking for one also. All I have found is a universal model so far.
EBAY seller (http://cgi.ebay.com/52mm-UNIVERSAL-DUAL-GAUGE-PILLAR-POD-MOUNT-HOLDER-/370369674308?cmd=ViewItem&pt=LH_DefaultDomain_0&hash=item563bc0bc44).

anyone know where I can get that 4 hole 4X4 panel insert?

anyone know where I can get that 4 hole 4X4 panel insert?


PPE sells it...

anyone know where I can get that 4 hole 4X4 panel insert?

I got mine at a GMC dealer. PPE might have them but when I needed mine they did not. I called them with the part #. So try them first than a dealer. good luck

Do you have the GM part number handy?

I happen to have one sitting on my desk. Back is stamped 21995828.