|
SMS 07-01-2005, 03:44 PM My 05 is a stripped down work truck and has very few options. The things i can access on the DIC are odometer, trip meter and engine hours. I see by the posts here that others can see MPG, fuel filter life, etc. My question is , is there a way to acess this info besides the buttons (which i don't have) on the steering wheel? It seems hard to believe that the computers would vary depending on the option level of the truck. Thanks Steve 04gmcmax 07-01-2005, 04:25 PM As far as I know the steering wheel controls are the only way to access the other functions on the DIC. TxChristopher 07-01-2005, 04:59 PM I would try getting the schematic for the wheel controls. Maybe the wiring is there, perhaps another half of a wiring connector under the dash that the base model doesn't use and all you need are contact switches. Just a shot in the dark but worth a look. Of course if it is board based in the wheel you are out of luck. . _nar_ 07-03-2005, 01:08 AM http://www.dieselplace.com/forum/showthread.php?t=21720 Read. Install. Enjoy. | ||