|
nick04duramax 06-30-2005, 03:15 PM I am going to buy a bellhousing blanket and was wanting to know what some of you guys are using. I have the nv4500 and its probably a little smaller than one for the allison. I wasn't wanting to have to pay alot and jegs and summit have some in my price range, but didn't know if they would work for our size trans. Also do I need the kevlar one or can I use the cheeper nylon one as long as its sfi approved? datsbad 07-01-2005, 09:46 PM curious also ??? Micheal Tomac 07-02-2005, 12:28 PM check with haisley machine or enterprise engine. They have sfi shields and/or sfi blankets for the nv4500 BigBadDodge 07-06-2005, 09:30 PM Like Mike said, got mine at EEP for the NV4500 you will tighten it all the wat up. But it fits nice. BBD nick04duramax 07-07-2005, 12:26 PM Thanks guys hopfully, I might be able to make it to the last couple of pulls this season if I'm lucky. dpfcummins 07-07-2005, 10:29 PM We have one of the EEP blankets for a NV4500 and one of the red jegs ones too. The jegs one was much cheaper and also SFI approved but i wouldnt trust it to hold much. It weighs nothing compared to the EEP one we have. Matt | ||