|
: wheel wobble after cognito leveling kit and new wheels and tires blkdmax 04-05-2010, 07:48 PM after installing my leveling kit and new wheels and tires some guys i work with noticed my whole wheel and tire on both sides on the front wobble when i go over a set of train tracks. could it be that A) my wheel bearings are going bad or B) i forgot to take the metal clips off my studs before i put aftermarket wheels on or some other reason im not aware of ?? any help would be greatly appreciated. Thanks in advance blkdmax 04-05-2010, 09:21 PM anyone? blkdmax 04-06-2010, 02:47 PM seriously nobody??? DMAX Will 04-06-2010, 03:10 PM Did you get your front end realigned afterwards? graniteduramax 04-06-2010, 03:19 PM sounds like a loose ball joint to me graniteduramax 04-06-2010, 03:21 PM post up some pics of how the setup looks Jason_2500 04-06-2010, 07:37 PM ball joints or pitman/idler arms. Get the pitman idler supports from cognito. Mine got a real shimmy to the steering after I did a leveling kit and 33x12.5s. Install new parts problem solved. greif03lb7 04-06-2010, 07:53 PM ball joints or pitman/idler arms. Get the pitman idler supports from cognito. Mine got a real shimmy to the steering after I did a leveling kit and 33x12.5s. Install new parts problem solved. X2 Aprilwine 04-06-2010, 07:54 PM Did you get your front end realigned afterwards? Yeah, I agree and if your alignment guy is competent he will check all the other front end steering parts at the same time and let you know if anything else needs attention. blkdmax 04-08-2010, 01:00 AM sorry guys i have been working nights and have not had time to get online...i am going to get an alignment tomorrow (again. 1st time from a hole in the wall shop) and also get i trust worthy shop to check out everything for me...i have the idler and pitman arm support kit i just havent had time to do the install...hunting and fishing too much. | ||