captd25
03-18-2010, 10:32 PM
I am looking for advice for air intake for my 06lbz duramax, also does any one know what voids warranty as far as after market parts go?
|
: Looking for cold air for duramax JDiesel 03-18-2010, 10:50 PM Void Warranty, nope. You will get all different opinions but my vote is for S&B dmaxdavid 03-18-2010, 10:59 PM $ can be better spent on other parts. I have made over 700 hp with stock air box and intake. wreedLBZ 03-18-2010, 11:13 PM stock intake is good for 550hp or so. The best intake for the LBZ is the Banks RAM AIR I think feyd 03-19-2010, 01:53 AM PPE mod the stock intake......yep, that's it! Trucstop 03-19-2010, 07:59 AM Check out the free PPE air box mod . Racing729 03-19-2010, 01:29 PM PPE airbox mod with stock filter element is the way to go:) duramax922 03-19-2010, 05:06 PM stay stock box not worth the money....spend it some place else like everyone else said.....and depending on your dealer they will hassle you about an air box. i had a bully dog and they told me an egr code was due to my air box but i guess it depends on your dealer k9duramax 03-19-2010, 05:57 PM Just throwing this out there..... Amsoil Cold Air Intake Kit (http://www.amsoil.com/catalog.aspx?Code=PF7075P&zo=1747262) dr820830 03-20-2010, 10:04 AM PPE airbox mod................... BHoward6.6 03-20-2010, 10:17 AM Read this ~ http://www.dieselplace.com/forum/showthread.php?t=117009 ~ it's a sticky in the Fuel System, Air, Exhaust, & Emissions Upgrades. For the most part it says the stock intake is good to over 500 whp. and it is one of the best filters money can buy. Everyone has to do their own thing. I did the PPE mod and kept the great stock filter. And put down 466 whp. exfrdlvr 03-20-2010, 11:12 AM I like my s&b. plus the cleanable filter is a plus Rader2146 03-20-2010, 12:36 PM Moved to Fuel System, Air, Exhaust, & Emissions Upgrades. DSTRBD 03-22-2010, 02:08 PM S&B. Leave the factory airbox stock just in case you have to go back to the dealer for warranty work. Kennedy 03-22-2010, 02:59 PM Leave the OE intake stock INCLUDING the pinwheel/centrifuge at the inlet. Donaldson did a fine job designing this intake. Mine is bone stock and wil stay that way. The only mod that I run is my ECM programming. P.S. I'm the guy that started the OE box mods with my 2002 setup. Diesel Lawn Guy 03-22-2010, 07:47 PM Stock is fine but if you go buy one I would have to S&B, I just did that and my truck seems to like it, ran stock for a long time tho captd25 04-13-2010, 04:38 AM Where do i find info on the ppe air box? BHoward6.6 04-13-2010, 09:37 AM Where do i find info on the ppe air box? PPE's website. http://www.pacificp.com/pdf/Airbox_Modification_v2.pdf | ||