i know the 4 inch lift kits work great for pulling but i just had a 4 to 6 inch lift given to me bran new never installed about 3 years old still in the box, long story short, a guy bought it new, he sold it to the guy that sold it to my brother, my brother just bought a new truck with a 6 inch lift already on it, so he gave it to me, anyways it seems like a good kit, i am not going to use the full 6 inches of the lift tho, reading throught the directions if u were to leave the torshion bars down its a four inch lift and if u crank them up its a 6 inch lift, so my idea is to leave it at 4 inches where my front drive line would be flat and inline, do u think this would work

hopfully that makes sence, just a though i would run by some of u guys others seem to think its a good idea and would work, just tring to get a second oppinion or other input on this idea

This is what I did. I bought my truck with a procomp 6" lift lowered the torsion bars and bought 2" blocks for the rear end and ditched the 4" blocks. See if the kit came with the center link support mine did so you wont need to worry about the center link. Also did it come with the traction bars?

how does it work for u, i arleady have 2.5 inch blocks in the rear i was not going to install the 4 inch blocks but i was thinking of installing the add a leaf tho, no i have a set of traction bars that i made myself, and yes i do think it came with the center link support

Works great for me. I pull the torsion bar bolts when Im at pulls to keep everything up front nice and low.

My 6"pro-comp work great for pulling

i have a cognito lift that is set at 5" for normal driving and when i do pulls i drop it down to the 4" height. the only issue i have is that my 35's rub pretty bad so i have to watch how far i turn my wheel. im going to get a set of 16x10's with 33's this year for pulling.

ya im going to get a set of 35s for normal driving, but i have a set of 16x10 rims with 33 12.5 16 sts's for pullin

thanks guys for the help, i figured it made sence and would work,

ya im going to get a set of 35s for normal driving, but i have a set of 16x10 rims with 33 12.5 16 sts's for pullin

thanks guys for the help, i figured it made sence and would work,

how do you like those sts tires. i ran my nitto terra grapplers which where ok but want something better.

when pulling your truck,the truck wants to leavel out. I ran 2" blocks in the rear with my 6" lift and it would leavel out.
Here is a video with the 2" blocks in the back. this was a stock pull so i didnt have susp stops in.
http://www.youtube.com/watch?v=ANLozVgzk0s

nice pull!! u need to hang weight if u can LOL, that comes up alot tho, i thought mine came up alot, wow

hear is my truck with 2.5 inch rear blocks, 1 inch of travel, and t bar bolts taken out

http://www.youtube.com/watch?v=DjRZn3-aytQ

how do you like those sts tires. i ran my nitto terra grapplers which where ok but want something better.

waiting to try them this year i tring to get ready as best i can for this year once i get the truck back from the shop there is alot of stuff i have to do to get ready,

-need to put this lift on,
-roll pan and paint
-build a new hitch
-build a new weight bracket
-build new bump stops
-build some joint sheilds
-build a new water/meth tank
-make some weights
-fix my exhaust, need to rework the stack, and go from a 4 inch to 5 exhaust

thats just the majors for now, and i need to get a move on it this seasons coming FAST!!!!!

that was back in 2008, but like i said at that pill i didnt have my susp stops in so it really pull the back down

can u guys still run stock rims on your truck also, i am getting a set of wheels and tires im looking at 17" KMC black diesels with 35 inch tires for street use, but we get some nasty winters around here and would like to put the stock rims back on so the salt dont kill the kmc diesels, and what off sets and back spacing u running on your rims,

zebler
i looked at your garage what kind of roll pan did u get it looks like it fits really nice.

I can with my pro comp. i think with the spindle drop lifts you can.

good mine is NOT the spindle drop,

what about the roll pan tho where did u get that the one on your 06?

good mine is NOT the spindle drop,

what about the roll pan tho where did u get that the one on your 06?

Sorry about that, i missd the roll pan part i got it at www.stylintrucks.com (http://www.stylintrucks.com) I dont remember the brand tho