<TABLE borderColor=#999999 cellSpacing=10 cellPadding=5 width="100%"><T><T><T>
<T>
<TR>
<TD vAlign=top width="70%">
<TABLE borderColor=#999999 cellSpacing=0 cellPadding=0 width="100%" border=1><T><T><T>
<T>
<TR>
<TD>
<TABLE cellSpacing=2 cellPadding=2 width="100%"><T><T><T>
<T>
<TR>
<TD class=content align=middle colSpan=2>
LB7 DURAMAX 6600 V8 TURBO DIESEL ENGINE SPECIFICATIONS

</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Engine type </TD>
<TD class=content2 vAlign=top align=right width="50%">Overhead Valves</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Piston displacement, cu. in.(liter) </TD>
<TD class=content2 vAlign=top align=right width="50%">402 (6.59) </TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Bore and stroke, in.(cm.) </TD>
<TD class=content2 vAlign=top align=right width="50%">4.1 x 3.9 (10.41 x 9.91) </TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Compression ratio </TD>
<TD class=content2 vAlign=top align=right width="50%">17.5:1</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Exhaust - single </TD>
<TD class=content2 vAlign=top align=right width="50%">All</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Horsepower</TD>
<TD class=content2 vAlign=top align=right width="50%">300@3000 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Kilowatts(kW)</TD>
<TD class=content2 vAlign=top align=right width="50%">223.80@3000 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Torque (lb.-ft.)</TD>
<TD class=content2 vAlign=top align=right width="50%">520@1600 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Newton - Meters (N-m)</TD>
<TD class=content2 vAlign=top align=right width="50%">702.00@1600 rpm</TD></TR></T></T></T></T></TABLE></TD></TR></T></T></T></T></TABLE></TD>
<TD vAlign=center align=middle width="30%">http://eogld.ecomm.gm.com/images/lightduty/graytabs/powercurves/lly_300hp.jpg</TD></TR></T></T></T></T></TABLE>
<TABLE borderColor=#999999 cellSpacing=10 cellPadding=5 width="100%"><T><T><T>
<T>
<TR>
<TD vAlign=top width="70%">
<TABLE borderColor=#999999 cellSpacing=0 cellPadding=0 width="100%" border=1><T><T><T>
<T>
<TR>
<TD>
<TABLE cellSpacing=2 cellPadding=2 width="100%"><T><T><T>
<T>
<TR>
<TD class=content align=middle colSpan=2>
LLY DURAMAX 6600 V8 TURBO DIESEL ENGINE SPECIFICATIONS

</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Engine type </TD>
<TD class=content2 vAlign=top align=right width="50%">Overhead Valves</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Piston displacement, cu. in.(liter) </TD>
<TD class=content2 vAlign=top align=right width="50%">402 (6.59) </TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Bore and stroke, in.(cm.) </TD>
<TD class=content2 vAlign=top align=right width="50%">4.1 x 3.9 (10.41 x 9.91) </TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Compression ratio </TD>
<TD class=content2 vAlign=top align=right width="50%">17.5:1</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Exhaust - single </TD>
<TD class=content2 vAlign=top align=right width="50%">All</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Horsepower - Manual</TD>
<TD class=content2 vAlign=top align=right width="50%">300@3000 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Kilowatts(kW) - Manual</TD>
<TD class=content2 vAlign=top align=right width="50%">223.80@3000 rpm</TD></TR>
<TR

<TABLE cellSpacing=2 cellPadding=2 width="100%">
<T>
<TR>
<TD class=content vAlign=top align=left width="50%">Torque (lb.-ft.) - Manual</TD>
<TD class=content2 vAlign=top align=right width="50%">1600@520 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Newton - Meters (N-m) - Manual</TD>
<TD class=content2 vAlign=top align=right width="50%">2160.00@520 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Torque (lb.-ft.) - Auto </TD>
<TD class=content2 vAlign=top align=right width="50%">1600@590 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Newton - Meters (N-m) - Auto </TD>
<TD class=content2 vAlign=top align=right width="50%">2160.00@590 rpm</TD></TR></T></TABLE>


I believe the RPM and Torque numbers are turned arround!


Engr. Bill

Yeah, I'll second that!

<TABLE cellSpacing=2 cellPadding=2 width="100%"><T>
<T>
<TR>
<TD class=content vAlign=top align=left width="50%">Torque (lb.-ft.) - Manual</TD>
<TD class=content2 vAlign=top align=right width="50%">1600@520 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Newton - Meters (N-m) - Manual</TD>
<TD class=content2 vAlign=top align=right width="50%">2160.00@520 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Torque (lb.-ft.) - Auto </TD>
<TD class=content2 vAlign=top align=right width="50%">1600@590 rpm</TD></TR>
<TR>
<TD class=content vAlign=top align=left width="50%">Newton - Meters (N-m) - Auto </TD>
<TD class=content2 vAlign=top align=right width="50%">2160.00@590 rpm</TD></TR></T></T></TABLE>





Thats what my truck fells like http://www.dieselplace.com/forum/smileys/Clap.gif

GMCSID,


Thanks for taking the time to consolidate the info. Is it just me or do both of those graphs look the same?


Thanks,
Dennis