I know it is a big eight lug pattern but I can't find anyone who sells them or will make them for me. If anyone can help please let me know. 540-454-9800:confused:

Go to a local machine shop that has a "plasmacam" or "torchmate". It's a CNC based machine that will cut out anything you can draw on the computer. I used to have one at my last teaching job. Some high school agriculture or metal shop programs will have one too. What your looking for would be quick and cheap to have made. Good luck.

american force .com
makes spacers/ adaptors for eight and ten lugs and they can also fabricate according to the measurements.

id be really cautious using spacers on a med. duty rig, especially if you plan on hauling heavy loads...they are not made for heavy loads...instead play around with wheel width. when my duals were about to rub when i installed 22.5's i inserted a narrower rim with a different offset on the inside dual and that pulled the two appart creating plenty of space with room to spare. I have loaded thousands of pounds on my rig and have never had a problem or second guessed if the wheel and tires would hold. wear has not been effected as well on any tire. Just my two cents