bypass blinking security light [Archive] - Diesel Place : Chevrolet and GMC Diesel Truck Forums

: bypass blinking security light


dumb-luck
02-16-2010, 06:01 PM
I have a blinking security light on my dash and truck will not start how do i bypass it?

Mcamatt2
02-16-2010, 06:27 PM
Hey man help us out here and fill out your signature with your trucks information, we can't help you if we don't know what truck your talking about.

Max Power
02-16-2010, 06:31 PM
do a google search for 'how to bypass passlock 2' and you should find what you're looking for fairly quickly.

aldredheron
02-19-2010, 06:05 AM
It turns on every time that the car is started. stays for about the 15 to 20 min. then goes off. I was told that the ignition switch is bad, but it has never failed or shown any signs of it. I dont have a manual for the car is there any thing in there about setting things up.The light comes on while Im driving and it also wont start and the light blinks. From what I have been told if you wait 10 minutes it will start. After the 10 minutes if you turn the key on but dont try to start it and the serurity light flashes dont try to start it. If it is on solid then it will start. Im trying to figure out what we need to do to fix it.

BlueBurby1
02-19-2010, 12:48 PM
theres a wire under the dash you need to cut, but it's gotta be cut while the vehicle is running.

google bypass passlock 2