So I figured since we have a new forum I'd start by posting up a rig pic's thread :D.
Here's what I had and it's in pieces currently :(. Started like as a 67 K10. Had/had a D60 front,Eaton rear with Detroit No-Spin,SBC 350 with a 4spd/np205. Lift in front comes from 6" Alcan springs and custom drop hangers and in the rear I run reversed 79 Ford F250 springs and a shackle flip. It had 37" Toyo M/T's. Sometime when I find the time it's going back together with a few changes like 5.13 gears,a front locker and 39.5" Iroks. Possibly a 203/205 doubler or a Stak Monster box :)

Nice, Kyle!

So I figured since we have a new forum I'd start by posting up a rig pic's thread :D.
Here's what I had and it's in pieces currently :(. Started like as a 67 K10. Had/had a D60 front,Eaton rear with Detroit No-Spin,SBC 350 with a 4spd/np205. Lift in front comes from 6" Alcan springs and custom drop hangers and in the rear I run reversed 79 Ford F250 springs and a shackle flip. It had 37" Toyo M/T's. Sometime when I find the time it's going back together with a few changes like 5.13 gears,a front locker and 39.5" Iroks. Possibly a 203/205 doubler or a Stak Monster box :)

sounds like a good project :cool:

the main reason I bought a tow rig
here's mine.....

'00 s10 zr2
6.0 LQ4
D60 (lockright, 35 spline Yukons/superjoints, drive flanges)
14 bolt (1541h shafts, spool)
5.38s
PSC full hydro-3 link
Alcan rear leafs
42" iroks
DIY beadlocks
atlas 3.8
etc.........

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture158.jpg

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture441.jpg

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture131.jpg

Kinda wish we had this in florida... on the other had we will always have mud

That's a nice rig. Makes me want to work on mine again soon :D.

sounds like a good project :cool:

the main reason I bought a tow rig
here's mine.....

'00 s10 zr2
6.0 LQ4
D60 (lockright, 35 spline Yukons/superjoints, drive flanges)
14 bolt (1541h shafts, spool)
5.38s
PSC full hydro-3 link
Alcan rear leafs
42" iroks
DIY beadlocks
atlas 3.8
etc.........

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture158.jpg

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture441.jpg

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture131.jpg

That's a nice rig. Makes me want to work on mine again soon :D.


:thankyou2

nice rigs!!

Mines a non chevy product.

http://inlinethumb40.webshots.com/37031/2984283300067906029S600x600Q85.jpg (http://good-times.webshots.com/photo/2984283300067906029movzOU)

2005 Jeep Rubicon.

315/75R16 multi mile rvt's -cheap and have worked out awsome
bobby longfeild front axles
chromo rear axles
1.25" b/l, 1" engine lift.
3.5" RE Superflex lift

Lots of dents and scratches.

On one run broke both left side axles. Which is why there upgraded now. :)
http://inlinethumb48.webshots.com/40047/2463028950067906029S600x600Q85.jpg (http://good-times.webshots.com/photo/2463028950067906029XuVpuP)

http://inlinethumb02.webshots.com/513/2839864960067906029S600x600Q85.jpg (http://good-times.webshots.com/photo/2839864960067906029bHpThJ)

96838

96839

96840Photos taken at Barnwell Mountain in Gilmer, Texas. Its also been to Colorado , Ouray, Telluride and Silverton. The funnest place I've ever wheeled is SMORR( Southern Missouri Off Road Ranch).

96838

96839

96840Photos taken at Barnwell Mountain in Gilmer, Texas.
You ever take that thing to miobi randy?

You ever take that thing to miobi randy?
A few times. Its a fun place. Driving through the river bed and the butt crack are always fun. I've got pics of it somewhere.

http://www.dieselplace.com/forum/garageimage.php?do=full&p=101320&d=1257968088
http://www.dieselplace.com/forum/garageimage.php?do=full&p=101321&d=1257968494
http://www.dieselplace.com/forum/garageimage.php?do=full&p=101324&d=1257968526
http://www.dieselplace.com/forum/garageimage.php?do=full&p=99872&d=1255578511

Heres Mine

Spec's??? I see a manual trans and a twin stick t-case :D

http://www.dieselplace.com/forum/garageimage.php?do=full&p=101320&d=1257968088
http://www.dieselplace.com/forum/garageimage.php?do=full&p=101321&d=1257968494
http://www.dieselplace.com/forum/garageimage.php?do=full&p=101324&d=1257968526
http://www.dieselplace.com/forum/garageimage.php?do=full&p=99872&d=1255578511

Heres Mine

That Zr2 is BadA**

http://i213.photobucket.com/albums/cc240/kot4bye/Thanksgiving%20at%20URE/DSCF6267.jpg

That Zr2 is BadA**


thank you :cool:

here's a little vid you might like

http://www.youtube.com/watch?v=FIELQkZZoBU

Here is my 67 landcruiser

http://i194.photobucket.com/albums/z53/varty_yo/P1010822-1.jpg

Spec's??? I see a manual trans and a twin stick t-case :D

Well its actually a TH400 tranny, just got a long ass shifter on it so i dont have to reach down, as for the t-case setup its an ORD doubler set-up with the triple stick. more specs in the garage! thanks for looking!!!

http://vids.myspace.com/index.cfm?fuseaction=vids.individual&videoid=59368142
Avideo testing the carb on the inclines

mine is a 1968 vw beetle 4x4 on 35" super swampers, with a drive-by-wire 4.8/5.3 vortec, correctly still in the back...not shoehorned into the front like every other V8 beetle hack job you see out there.

hey at least its something no one has ever seen before... :p:

ill get some pics in a minute.

ben

mine is a 1968 vw beetle 4x4 on 35" super swampers, with a drive-by-wire 4.8/5.3 vortec, correctly still in the back...not shoehorned into the front like every other V8 beetle hack job you see out there.

hey at least its something no one has ever seen before... :p:

ill get some pics in a minute.

ben

I can't wait to see this.

Here she is the day we picked her up from Poplar Bluff, Mo. Boy do they love the salt on their roads!!!

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Chevy/30SEP05046.jpg

Here she is as she sits now.

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/TTC%202010%20-%20Hollister%20Hills%20CA/IMG_2177.jpg

We (and by we, I mean my friends back home in the states :) ) are in the middle of a big block swap right now. Can you say FoFittyFo???

'78 Big-10 Stepside w/ BBC 454 on the propane/SM465/AtlasIV (w/ 10.3:1 low-low), Dana 60/Dana 70HD both w/ Detroits and 4.56:1 gears. Longfield CV shafts in the 60, full hydro, 1410 42deg cv on front driveshaft, antiwrap bars front and rear. 44/19.5/16.5 Grooved Boggers wrapped around recentered H1's w/ pvc inserts.

This was at Trees ranch. The 350 sure gave it hell! Snapped the slip shaft on the front drive shaft, and the drivers side shaft in the 70HD. :D

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/Trees-Memorial%20Weekend%2008/th_treesranch054.jpg (http://s47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/Trees-Memorial%20Weekend%2008/?action=view&current=treesranch054.flv)

Here we are grooving the boggers. :D

http://www.youtube.com/watch?v=dwItiRI_iC0

There are 4 of us from Texas who have thrown our names in the hat for Top Truck Challenge 2010 put on by Four Wheeler Magazine in Hollister Hills, California. The ballot comes out in next months magazine and would love to have your votes!

Brandon Spears - College Station

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/TTC%202010%20-%20Hollister%20Hills%20CA/IMG_0916.jpg

Terry Estes - Kempner

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/TTC%202010%20-%20Hollister%20Hills%20CA/terry.jpg

PJ Hale - Kempner

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/TTC%202010%20-%20Hollister%20Hills%20CA/0b4642d4.jpg

Here we are lined up getting ready to head up Carnage Canyon in Buena Vista, Colorado.

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/Colorado%202009/chinamanslineup.jpg

On Carnage Canyon (didn't have the fenders or hood work done yet for this trip)

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/Colorado%202009/bigrock1.jpg

sounds like a good project :cool:

the main reason I bought a tow rig
here's mine.....

'00 s10 zr2
6.0 LQ4
D60 (lockright, 35 spline Yukons/superjoints, drive flanges)
14 bolt (1541h shafts, spool)
5.38s
PSC full hydro-3 link
Alcan rear leafs
42" iroks
DIY beadlocks
atlas 3.8
etc.........

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture158.jpg

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture441.jpg

http://i7.photobucket.com/albums/y280/1TFROT/rausch%20creek%20sept%2009/Picture131.jpg



I recognize that obstacle. That is the crevice in RC Penn is it not? I broke my Ford withen 3 hrs last time i was down there and could not repair it "sheared the teeth off the 9" ring and pinion and twisted both axles idling in 1st gear". There is alot of traction in those rocks!!!! I started building an S-10 with rockwells but have given up for now. The rest of the guys in my club are now running rockwells and they break those everytime they go to RC.

Heres my Samurai

I recognize that obstacle. That is the crevice in RC Penn is it not? I broke my Ford withen 3 hrs last time i was down there and could not repair it "sheared the teeth off the 9" ring and pinion and twisted both axles idling in 1st gear". There is alot of traction in those rocks!!!! I started building an S-10 with rockwells but have given up for now. The rest of the guys in my club are now running rockwells and they break those everytime they go to RC.


yep, sure is :D

here's from the back
http://www.houseofloy.net/smsmith/Rausch_Creek_092409/pic_0153.jpg

http://www.houseofloy.net/smsmith/Rausch_Creek_092409/pic_0156.jpg

thankfully I had the 6.0 in there for that trip. the original 4.3 wouldn't have had enough balls to drag me through ):h

Hmmm, you went to the 6.0 huh. I had plans of sticking with the 4.3 for less weight and with 6.72 gears i didnt think i would run out of power, just rpm. If i ever get this thing done it will have a fresh 700R4 and the NP-208 transfer case. With this trans/transfer case combo and the axles it should be plenty low enough for crawling. Other fella's in my club as well as myself run on a budget and we have found these peices to be fairly strong when running Rockwells. Obviously the axles are taking all the stress away from the driveline. I figured if i did break it these parts are laying in alot of backyards all over the country so it wouldnt be hard or expensive to fix when away from home.

Hmmm, you went to the 6.0 huh. I had plans of sticking with the 4.3 for less weight.

you would be very surprised at how close the 6.0 and 4.3 are in overall weight....

ben

you would be very surprised at how close the 6.0 and 4.3 are in overall weight....

ben


very true

I wheel with this and it is currently my wifes daily driver.................until it is paid off:D. Totally stock still.

http://i51.photobucket.com/albums/f380/CBsport/Jeep/100_5046.jpg

Found some from out colorado trip to Buena Vista

On Carnage Canyon BV

http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/DSC_7817.jpg

BASHIN' IT!!! (headed up to wheeler lake)

http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/DSC_7399.jpg

We didn't make it all the way, turned around on this big snow bank.

http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/DSC_7542.jpg

What happens when you throw a HMMWV magnesium runflat on a camp fire, then toss a pringles can full of water on it once the mag. is burning????

:D
http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/th_MVI_0397.jpg (http://s46.photobucket.com/albums/f124/CreightonRea/colorado%202009/?action=view&current=MVI_0397.flv)

Great looking rigs! You guys are really making we want to get my '76 step-side project moving again!

I had the buggy for about 2 months. I bought the ford for $250 and it really gets around for what it is It would move about a foot in that pic but not get out. I think the front is limeted slip. It is a 76 with a 300 inline 6 and 4 speed f-150 custom.

Here's my cheap Jeep, a '80 CJ5. It's not a cheap Jeep like on tv where they spend 10-20k on the rig. I have less than $3k in this one. It's not perfect, but it is very capable and fun. :) Highlights of it are: 38.5 TSLs, Toyota axles with spring over locked front and rear and Toy rear springs (brings the rear back 6"), hydro assist steering, roll cage, stereo, buttons, switches and knobs and a bunch of fab work done by me and a buddy of mine. :) It''s still a work in progress, but's it is a lot of fun. :thumb:

Here it is in action:

http://www.youtube.com/watch?v=Fxw7yC2BSiY

Heres my summer weekend wheeler...

Towing a disabled blown clutched YJ.
http://www.youtube.com/watch?v=ClbXuhOVvQM

Deep hole...no one knew what it entailed (the steep rock face next to it wasnt helping me think it was shallow)
http://www.youtube.com/watch?v=xnMTuucIU8E&feature=related

Its not my wheeler but hauled like a trooper (this is about 2 years ago and been kicked around here a few times)

http://www.youtube.com/watch?v=RVMDXyuDsEI&feature=related

and finally.... here's 06Bowtie_Guy's rubicon (he posted on page one I think) - sorry no preview with this link but goes direct to Webshots.
http://good-times.webshots.com/video/3028425190103926634QkhGQX

I've seen that last one a few times around here. Still like it. :thumb:

Nice!

I should clarify that the one of the "BlackMax" and trailer isnt my REGULAR wheeler. It is in fact my rig when I was hauling commercially for a drilling and blasting company.

That is the last time I mudded my truck like that. I spent close to 8 hours hosing out the frame after that job. Now its the jeep (and atv) that get the beatings....lol

i didnt know that was your truck, nice vid man

i didnt know that was your truck, nice vid man

Thanks...I see its up to 120k + views....neat.

I should have been clearer when I posted, but the thread is "Post your wheeling rig pics". I wouldnt have posted someone else's for credit as my own rig(s).

I suppose I'll throw a few up. Still a work in progress, but its been a lot of fun so far.

OEM 4.3 CPI, bone stock
custom SFA conversion, build Dana 60s front and rear
built TH350, full manual, reverse pattern
203/205 doubler in process (currently a built 231CHD)
front 4 link and PSC full hydro in process (currently SOA with hydro assist)
42" SX2s (formerly 40" TSLs)
custom rear 4 link coming hopefully this summer
lots of custom everything, all done by me

http://i128.photobucket.com/albums/p200/knaffie/Z%20Rock%2009%20Rausch%20Creek/IMG_3331-2.jpg

http://i128.photobucket.com/albums/p200/knaffie/Z%20Rock%2009%20Rausch%20Creek/DSC00057.jpg

http://i128.photobucket.com/albums/p200/knaffie/Z%20Rock%2009%20Rausch%20Creek/DSC00084.jpg

http://i128.photobucket.com/albums/p200/knaffie/ZR2%20general/IMG_0158.jpg

http://i128.photobucket.com/albums/p200/knaffie/ZR2%20general/IMG_0162.jpg

http://i128.photobucket.com/albums/p200/knaffie/Silver%20Lake%20June%202009/knaffleair1.jpg




See why I want a Dmax........ this isn't workout out all that well for me once I leave the flatness of Michigan.........

http://i128.photobucket.com/albums/p200/knaffie/Z%20Rock%2009%20Rausch%20Creek/IMG_3249.jpg

that's a great pic of the 3 of us!!! :rocking:

i guess i will add my junk,lots of fimilar rides around here.

before and after (prolly be shot for posting theese)

before,400 465/203 12 bolt 3.73 locrite, dana 44 5 inches of lift 39.5 tsls.

http://i204.photobucket.com/albums/bb5/twoslo4five0/theflyingbanana001.jpg
http://i204.photobucket.com/albums/bb5/twoslo4five0/theflyingbanana002.jpg

theese days :eek: (i have 46s for it just dont have the truck back together cause im loosing the rest of the body)

http://i140.photobucket.com/albums/r6/clarkjw24/Harlan/DSCN3477.jpg
http://i140.photobucket.com/albums/r6/clarkjw24/Harlan/DSCN3486.jpg
http://i140.photobucket.com/albums/r6/clarkjw24/Harlan/DSCN3487.jpg

Here is my scrambler

385 SBC, SM465,3:1 NP205, shaved 14bt dana 60 both full detroit w 5.13's, 41 irocs

http://i282.photobucket.com/albums/kk241/RZO2/Marchmadness2010007.jpg

me @ carnage BV Colorado
http://i282.photobucket.com/albums/kk241/RZO2/BVwheelie.jpg

Metal Masher in Moab

http://i282.photobucket.com/albums/kk241/RZO2/icewheelie041.jpg

Holy Cross Trail

http://i282.photobucket.com/albums/kk241/RZO2/HolyCross2008070.jpg
http://i282.photobucket.com/albums/kk241/RZO2/HolyCross2008077.jpg

Nice rig. Awesome scenery out there.

http://i162.photobucket.com/albums/t248/projectblazinss/20131_276830905950_537800950_390121.jpg

http://i162.photobucket.com/albums/t248/projectblazinss/20131_276830905950_537800950_390121.jpg

Did you make it?

Did you make it?

Nope. My trailor hitch anchored me down right there.

Nope. My trailor hitch anchored me down right there.

Looks like you made it through the hard part though :cool:

The hard part is usually not going into or through the hole, its going up hill and out of it at the other end and you've dug yourself down. Front end starts to go up, hitch goes down, and you're dragging anchor.

sweet 8 :cool:

Here is my scrambler

385 SBC, SM465,3:1 NP205, shaved 14bt dana 60 both full detroit w 5.13's, 41 irocs

http://i282.photobucket.com/albums/kk241/RZO2/Marchmadness2010007.jpg

me @ carnage BV Colorado
http://i282.photobucket.com/albums/kk241/RZO2/BVwheelie.jpg

Metal Masher in Moab

http://i282.photobucket.com/albums/kk241/RZO2/icewheelie041.jpg

Holy Cross Trail

http://i282.photobucket.com/albums/kk241/RZO2/HolyCross2008070.jpg
http://i282.photobucket.com/albums/kk241/RZO2/HolyCross2008077.jpg

I love the carnage BV trial, we will have to holler at you next time we are up that way!

not as extreme as the rest but its alot more articulated than appears, was hard to get a good angle but it was fun, also hard to get a good shot when it just you and your dogs and i dont know about you but they dont seem very interested in taking a pic or even watching for that matter:help2: ,lol funny story the day before this i was going to the performance shop and snapped my sway bar end link on a speed bump (over torque :laugh_exp oops) then i go out on the oil field roads shed huntin and huntin for fossils and shit like that and not even a loose bolt lol.

1TFROT, you got a build thread somewhere on your s10?

Sweet! A spot for wheeling rigs.

Here's a few of mine (and the reason I bought my truck).

http://i51.photobucket.com/albums/f359/abqtj/Johnson%20Valley%202007/DSC_6636.jpg

http://i51.photobucket.com/albums/f359/abqtj/Moab07/IMG_0433-1.jpg

http://i51.photobucket.com/albums/f359/abqtj/Blanca08/IMG_2196.jpg

1TFROT, you got a build thread somewhere on your s10?


not really. what would you like to know?

everything was done in phases so we didn't document too much. only a couple pics here and there to keep track of some things.

No worries, Im actually planning a crewcab s10 truggy build and like to see what other guys are doing

heres my mud toy...reason im buyiong a tow rig too.

video:
http://www.youtube.com/watch?v=4a3BG2EYbsE

pics:

No worries, Im actually planning a crewcab s10 truggy build and like to see what other guys are doing

np. good luck with the build and holler if you have any questions :cool:

http://i282.photobucket.com/albums/kk241/RZO2/BVwheelie.jpg







tell me about your rear fender? I've been looking for skins, and can't find any for the scrambler. I cut mine for TJ flars and decided I'd just rip them off so I never installed.

mine:

http://i209.photobucket.com/albums/bb297/CJATE/Jeep/photo-19-1.jpg
http://i209.photobucket.com/albums/bb297/CJATE/Jeep/P8230113Large.jpg
http://i209.photobucket.com/albums/bb297/CJATE/Burtstock2010/burtstock2010018.jpg

is my Heep

Its a 1989 YJ 1995 LT1, Sm465, Np205, Dana 60 f/r, 42's, 3 link front, 17" coilovers


http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs252.ash1/17945_265647292964_563507964_3479772_1743632_n.jpg Here



http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs252.ash1/17945_265876052964_563507964_3480720_26690_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs156.snc3/18345_267288042964_563507964_3487603_553059_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs065.snc3/13320_347242417964_563507964_3747823_759480_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs467.ash1/25619_376936782964_563507964_3871922_1413422_n.jpg

http://hphotos-snc3.fbcdn.net/hs468.snc3/25666_364489852964_563507964_3787896_3955704_n.jpg

These were just taken while we were at Top Truck Challenge.

http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/TTC%202010%20-%20Hollister%20Hills%20CA/Texans/4a881549.jpg

In the Tank Trap
http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/TTC%202010%20-%20Hollister%20Hills%20CA/Texans/5b058893.jpg

Robin Stover's (editor at Four Wheeler) stepside backed up to mine. I told him it was not my fault if any of my dents jumped ship and hopped on his. :D
http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Trips/TTC%202010%20-%20Hollister%20Hills%20CA/Texans/450ad535.jpg

Here the new dual TBI's sit on top of the 454. We just didn't have time to finish up tuning on the engine before the comp, but they are working on that now. It is going to be a screamer for sure!
http://i47.photobucket.com/albums/f192/DRAGOONRANCH/Chevy/BBC%20Swap/6f2b553b.jpg

Lots of pictures here also.

http://s1021.photobucket.com/albums/af332/flatbedj/TTC2010/?start=all

I thought about mounting a dual TBI setup on a 500 Caddy one time, I'm glad to see it done that way.

Lots of pictures here also.

http://s1021.photobucket.com/albums/af332/flatbedj/TTC2010/?start=all

how was the poison oak? :D

my newest prioject

http://i204.photobucket.com/albums/bb5/twoslo4five0/4%20runner/854runner002.jpg

My wheelin rig. 92 suzuki samuri, stock YJ leafs, toyota axles, spooled rear, locked front, 6.5:1 t-case, cage, 33s, power steering, stock 1.3L and some other stuff. Soon to be on 35s or 37s and get fully enclosed so i dont get wet when it rains lol

http://i45.photobucket.com/albums/f88/james450r/untitled-4.jpg


my other toy im building. 84 ford ranger, 21" of travel at all 4 corners (not articulation), 4.0L, 5 speed manual, and front to back cage. Will be racing the 1450 class and 7200 class in BITD
http://i45.photobucket.com/albums/f88/james450r/Picture031.jpg
http://i45.photobucket.com/albums/f88/james450r/Picture029.jpg
http://i45.photobucket.com/albums/f88/james450r/Picture028.jpg

I thought about mounting a dual TBI setup on a 500 Caddy one time, I'm glad to see it done that way.

Once we get it running right, I will post the write-up on it. We are trying to keep it clean, so don't want to post it anywhere and let interwebz jeeniouses pick it apart in the middle of it. :D

how was the poison oak? :D

Didn't have any trouble with it except on my a$$ cheeks. The 14 hour plane ride from Atlanta to Dubai didn't help any either. :(

my newest prioject

http://i204.photobucket.com/albums/bb5/twoslo4five0/4%20runner/854runner002.jpg

Those make some real cool lookin wheelers.


http://i45.photobucket.com/albums/f88/james450r/Picture028.jpg

What kind of leafs do you have in the back that are giving you that much travel?

Those make some real cool lookin wheelers.



What kind of leafs do you have in the back that are giving you that much travel?

64" leafs with progressive preload pack. it need about another 200lbs in the back to get it to ride height cause right now its only got maybe 3" of down travel lol

My truck in my sig and my atv are my wheelin rigs.

Here are some vids of my wheeling/tuggin/showin off rig

http://www.youtube.com/watch?v=Hmw_DW7TYR4&feature=related
http://www.youtube.com/watch?v=s1wWRaeW3Vw \
http://www.youtube.com/watch?v=PJK7DeRec94
http://www.youtube.com/watch?v=EHf4n5VQ6iw
http://www.youtube.com/watch?v=JRSTFbWuCT4
http://www.youtube.com/watch?v=gXZU85oIhog

my old rig- 85 4runner- 4.3 vortec, 5spd, stock t case with 4.1 kit, and marlin doubler with ultimate crawler setup, 190.1 final ratio, 4.56 yukons,detroits front and rear, cromoly axles front and rear, birfeild eleminator kit, 3'' OME springs, 3'' body lift, gold bonz shackels, bilstien 5100s, tom woods shafts, 37'' boggers, warn hubs, exo cage, all pro sliders and bumpers, AOR tube doors, equis guages, race buckets w/ RCI 5pts, k&N, flowmaster, centerforce clutch & flywheel, 4core Rad, fuel cell. sold it for the blue one to start new project

new rig 86 4runner- marlin crawler SAS 6'' kit, 5.13 yukons, detroits front and rear, 22RE on propane, auto, 36'' TSL on eagle aloys, bedliner inside and out, full interior, warn hubs, warn tabor 9k winch with synthetic line, custom bumber, bilstien 5100s, gold bonz shackels, long spline shafts, trussed 85 front axle, marlin crossover steering

http://www.dieselplace.com/forum/attachment.php?attachmentid=100569&d=1269136659



http://www.dieselplace.com/forum/attachment.php?attachmentid=100570&d=1269136659

http://www.dieselplace.com/forum/attachment.php?attachmentid=100571&d=1269136659

http://www.dieselplace.com/forum/attachment.php?attachmentid=100572&d=1269136659

Orange when i drive and pink when my wife drives.

Orange when i drive and pink when my wife drives.


nice rig. comp treps or reg? either way, how do you like them? I just sold some reg iroks for some reg SXIIs (42" flavor) so I hope I made the right choice :D

will be out your way this Oct to play in Moab and BFE :cool:

nice rig. comp treps or reg? either way, how do you like them? I just sold some reg iroks for some reg SXIIs (42" flavor) so I hope I made the right choice :D

will be out your way this Oct to play in Moab and BFE :cool:

Thanks, They are sticky compound and i love them. When at BFE make sure you run Upper Helldorado and Green Day, Have fun.

nice rig. comp treps or reg? either way, how do you like them? I just sold some reg iroks for some reg SXIIs (42" flavor) so I hope I made the right choice :D

will be out your way this Oct to play in Moab and BFE :cool:

when you gunna be out there 1t?? we got a group goin holloween weekend to moab for some fun. will be my first time out there with the sami

Had alot of fun with this.


http://www.youtube.com/watch?v=gnAMc7jxWfc

79 f250 35" TSL Swampers, posi front/rear, 8" blocks in the rear, stock front ride height
http://sphotos.ak.fbcdn.net/photos-ak-snc1/v3900/137/65/790544794/n790544794_1659054_7758223.jpg
http://sphotos.ak.fbcdn.net/photos-ak-snc1/v3900/137/65/790544794/n790544794_1659064_5479521.jpg
long story short they said that a samuri just went thru that creek earlier that day, (they failed to mention it floated across it)
http://sphotos.ak.fbcdn.net/photos-ak-snc1/v3900/137/65/790544794/n790544794_1659060_2541060.jpg
later that day after i got the water out of the cylinders. Radiator was caked full of mud from being a submarine, and that is a stock jeep buried to the floor boards that im pulling out.

when you gunna be out there 1t?? we got a group goin holloween weekend to moab for some fun. will be my first time out there with the sami


sorry, forgot to check back. we are leaving this coming saturday and will be there for a full week (wheelin mon-fri)

hitting the road Oct 16th (sat) to get out there.


Thanks, They are sticky compound and i love them. When at BFE make sure you run Upper Helldorado and Green Day, Have fun.


we absolutely plan on doing Upper as well as most of BFE. thanks, we will!! :D

sorry, forgot to check back. we are leaving this coming saturday and will be there for a full week (wheelin mon-fri)

hitting the road Oct 16th (sat) to get out there.





we absolutely plan on doing Upper as well as most of BFE. thanks, we will!! :D

how much does a trip out to moab with a truck typically cost.

How much does gas and food run for how many days you wanna be there?

heres some on my 93 ranger I used to have it had 4.0 5 spd with 4.10 gears and welded gears 33x12.50 tires no lift just 2 inch coil spacers and cut fenders


http://i933.photobucket.com/albums/ad172/09slobalt/l_43f01b295d5f46808c979b38a6a7cf7d.jpg
http://i933.photobucket.com/albums/ad172/09slobalt/l_1572a54354384afb92d3a94ab083bba6.jpg
http://i933.photobucket.com/albums/ad172/09slobalt/l_beff5b7e1dac421781bed2399059e159.jpg
http://i933.photobucket.com/albums/ad172/09slobalt/l_92cc372217514fadb9e2efdcd2cf84d8.jpg

thats a pretty sick picture on the snow bank where is that?
Found some from out colorado trip to Buena Vista

On Carnage Canyon BV

http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/DSC_7817.jpg

BASHIN' IT!!! (headed up to wheeler lake)

http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/DSC_7399.jpg

We didn't make it all the way, turned around on this big snow bank.

http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/DSC_7542.jpg

What happens when you throw a HMMWV magnesium runflat on a camp fire, then toss a pringles can full of water on it once the mag. is burning????

:D
http://i46.photobucket.com/albums/f124/CreightonRea/colorado%202009/th_MVI_0397.jpg (http://s46.photobucket.com/albums/f124/CreightonRea/colorado%202009/?action=view&current=MVI_0397.flv)

That is was where we turned around on the Wheeler Lake trail. It was hell getting that far in my chevy w/ no clutch. Kept having to start it in gear and that was a pain in the rear by the end of the day. :doh:

food and lodging were easy since I have my camper, but fuel was not cheap :p:

here's a couple quick vids from our trip

http://www.youtube.com/watch?v=cvMXFOPTgb0

http://www.youtube.com/watch?v=_iQgyQtgFrc

http://www.youtube.com/watch?v=qnjlEdjRGrg

I must say... looking through all these pics of the Jeeps wheelin' makes me thank guys like you... You give me a paycheck!

Here is my rig. 1989 Toyota Pickup SAS, 3.0V6/R150F tranny/Dual Rf1A Tcases/detroits front and rear/5" springs/ 38" TSLs
I use my truck in mud and rocks. Its a good dual purpose rig, but it could use a little more balls.
Ferriday, Louisiana
http://img.photobucket.com/albums/v639/Cajun4x4/ferriday%202010/DSCF0605.jpg
http://img.photobucket.com/albums/v639/Cajun4x4/ferriday%202010/DSCF0635.jpg

Hot Springs, Arkansas
http://img.photobucket.com/albums/v639/Cajun4x4/Superlift%20ORV%20Park/IMG_1453.jpg
http://img.photobucket.com/albums/v639/Cajun4x4/Superlift%20ORV%20Park/IMG_1490.jpg

Mason, TX (Katemcy) My truck was stupid tall with this additional 3" BL at the time.
http://img.photobucket.com/albums/v639/Cajun4x4/DSCN0122.jpg
http://img.photobucket.com/albums/v639/Cajun4x4/DSCN0171.jpg
http://img.photobucket.com/albums/v639/Cajun4x4/P5240404.jpg

Those are some good pictures of it at Katemcy. I really miss that place, hopefully I will be able to make it out to the new K2 next year.

Here's what used to be my daily driver/wheelin' rig... 93 Toyota P/U SR5 SAS, Detroits front and rear, Warn bumpers front and rear, Longfields... OBA, on 36" Iroks.

Needless to say, some a$$hole in a Ford hit it head on and totaled the truck, Toyota drove away and still runs... Ford... no longer in existence.

I work with a bunch of Jeepers in West Chester), I was the only girl wheeling that day out of 8 guys... Needless to say, I didn't leave 2wd that whole day, even got to pull out a few Jeeps here and there :)

http://i29.photobucket.com/albums/c293/rebelpaintrider/93%20Toyota%20SAS/RC_0144.jpg

http://i29.photobucket.com/albums/c293/rebelpaintrider/93%20Toyota%20SAS/RC_0078.jpg

http://i29.photobucket.com/albums/c293/rebelpaintrider/93%20Toyota%20SAS/RC_0074.jpghttp://i29.photobucket.com/albums/c293/rebelpaintrider/93%20Toyota%20SAS/IMG_1356-2.jpg

Yotas FTW!

Here's mine, and it's a diesel.

1990 Blazer
6.2 with gasket matched J-code intake, turned up IP, dual 2.5" Flowmasters.
700r4, NP241
D60 front with locker and 35-spline chromoly stubs
14FF rear w/ welded diff
4" lift with 39.5" Super Swampers
trimmed fenders, dovetail rear, rockers cut out and replaced with 3x3 tube, customer bumpers, winch, full rollcage.

http://coloradok5.com/photos/data/805/DSC_8271.jpg

http://coloradok5.com/photos/data/805/beard_quarry_2-13-10_014.jpg

I love those old 6.2s!

Lovin' this thread!!

bump. lets get this thread going again

not a new rig, but a couple new mods :D

just got the rig back from the tuner. has a new cam, headers and dual exhaust (flowmaster 44s). should be a little more fun to drive now!

YouTube - new cam, idle

YouTube - new cam, idle2

YouTube - new cam, rev up

went up to about 5grand in the last vid. tuner said it pulls hard up to about 6200 ):h

Orange one is mine. This was in Harlan Ky
http://inlinethumb28.webshots.com/33307/2937757580106103434S600x600Q85.jpg

My toy, 77 stepside, built 454, th400-205 setup dana 60/14bolt and some 44"boggers

Just doing the finishing touches to it (trim fenders and taking body lift out)

http://i54.photobucket.com/albums/g101/blownblue/cars/9e8aa84d.jpg

Some nice rigs on here. Mine is nothing special. 1985 Yota 22RE with EFI and sold front axle. Spool in the rear and a detroit up front, 5 inches of total lift and 35 MT's

http://i205.photobucket.com/albums/bb36/cbr600rx7/toyota2.jpg
http://i205.photobucket.com/albums/bb36/cbr600rx7/toyota1.jpg
http://i205.photobucket.com/albums/bb36/cbr600rx7/100_13472.jpg

I love this thread!

Here is my weekend toy....

http://i859.photobucket.com/albums/ab160/WaterBoy05_2010/Random/294249_10150414947650081_588000080_10414683_202837 7129_n.jpg

http://i859.photobucket.com/albums/ab160/WaterBoy05_2010/Random/284233_1873679014106_1605094666_31629340_5460051_n .jpg

http://i859.photobucket.com/albums/ab160/WaterBoy05_2010/Random/285231_10150326393805081_588000080_9681082_1374834 _n.jpg

http://i859.photobucket.com/albums/ab160/WaterBoy05_2010/Random/IMAG0025.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash4/296471_10150347513613041_688033040_8380330_1954024 737_n.jpg

here is mine, its for sale :)

Here is a pic of a recent trip in the mountains.

Here is a pic of a recent trip in the mountains.
shovel looks lightly used :hehe:

Shovel didnt do much, had to use winch. Was fun. Gotta go in the spring so I can get really nasty muddy.