I just installed a set of 295x75x16 with 16x8 rims on my 03. I cranked up the torsion bars 6 turns trimmed the air dam and shimmed out the bumper. My problem is the inner fender. I was looking at a leveling kit from ebay, Are the any good... Also I have been hearing a lot about the cognito kit What is the price tag on one of these. Thanks.

I installed some 285 MT/R's on my 2004. The inner fender rubbed because the emergency brake cable was pushing the fender well out. Use some zip strips or a hose clamp to pull the e-brake cable back, there is an eyelet right by it (that is where the assemby line was supposed to run the cable, woops :( ) and then use some zip strips and a couple of small holes to holes drilled in the inner fender well to hold it back. That should fix the problem.
BTW, http://www.cognitomotorsports.com/
Contact information and some info on the leveling kit.
:grd:

I do not know the price of the Cognito leveling kit but I have used their parts before and can say they are top notch. I talked with Justin (Owner I think) at Cognito and he built me a custom set of upper a-arms for my last truck and they performed flawlessly. I also installed one of their sterring upgrades fro the pitman/idler arm. Good products and Justin really knows his stuff.


Chris

Thanks guys

To compare apples to apples you should also include the wheel width and backspacing in the comparison.