Guys,


I just finished the Attitude install in the overhead console using the ATS mount. I posted some pics for reference on wiring and such. See the sig.


http://www.dieselplace.com/forum/uploads/EA1_108708582VlZoYu_ph.jpgEdited by: Trippin

That is a very clean install.Nice job!!

http://www.dieselplace.com/forum/smileys/Clap.gifThat is very very nice!


Where do you get this 'ATS Mount' ?


Im expecting my Juice next week and would love to do the same overhead install. http://www.dieselplace.com/forum/smileys/Big Smile.gif

I'm Impressed, VERY NICE!http://www.dieselplace.com/forum/smileys/Clap.gif

I am really impressed with that setup, but I have to wonder how in the world you can see that thing up there, I held mine up there with some tape just to see, I have to crank my neck and about pull over to see it!

Good lookin' install Trippin.http://www.dieselplace.com/forum/smileys/Clap.gif How "thick" is that firewall grommet?


Josh

The mount is available from http://www.atsturbo.com/index.php, but it's not shown on their web site. You'll have to call them. With or without the two aux. switches, $45.00.


The grommet is not very thick I just poked it with a scribe.


Eric, I stressed on the same thing. Will I be able to see it up there, especially since I'm short and like to drive with the seat pretty far forward. I ultimately decided to put it there for the cleanliness of the install. Also, with the "alert" functions of the Attitude, do I really need to watch it? I originally mounted it on the A-pillar with the Edge supplied bracket, been there since October. No surgery required for this install so I figure I can move it later if it's a problem.

Thanks Trippin for some reason I figured it was a lot thicker and ran the cable via the door jambhttp://www.dieselplace.com/forum/smileys/Confused.gif. Guess I'll move it to through the grommet nowhttp://www.dieselplace.com/forum/smileys/Big Smile.gif.


Josh

What are those two black buttons on the right for?

What are those two black buttons on the right for?


Anything you want them for. They are just a couple of Aux. switches. You can order the mount with them or without. Examples would be arming a nitrous unit, propane unit, additional lights, etc.

What are those two black buttons on the right for?


Anything you want them for. They are just a couple of Aux. switches. You can order the mount with them or without. Examples would be arming a nitrous unit, propane unit, additional lights, etc.








Ahh, ok, thanks. So I guess the wise person would order the mount With them even if there was no immediate intended use. http://www.dieselplace.com/forum/smileys/Big Smile.gif

Very nice lookimg install, but where am I going to put my sunglasses?

One of the switches would work great with the High Idle.http://www.dieselplace.com/forum/smileys/Clap.gif