skipgreene
06-11-2005, 07:38 PM
i just changed my fuel filter on my 02' duramax and now it won't start.any ideas?
|
: help-gotta drive 700 miles tomorrow! GMC2500HD 06-11-2005, 07:48 PM Did you loosen the bleed screw to prime it and make sure that the truck is getting diesel? I would check that first. Also check all the connections on the wires to the filter. hdpoul 06-11-2005, 08:05 PM o ring TheBac 06-11-2005, 08:49 PM Either of the above....Sometimes the o-ring will slip out of its channel as you tighten the filter. Just go back over everything again. Tom wickll 06-11-2005, 09:06 PM When bleeding the air out, once you tighten the screw, give it a few more pumps until you feel good pressure. Good luck. Diesel Dragon 06-11-2005, 09:18 PM Or you could prefill the filter and never have to worry about priming again lakingslayer 06-11-2005, 11:17 PM Or you could prefill the filter and never have to worry about priming again That isn't the best thing to do if you don't have a pre filter since you will be putting a lot of unfiltered diesel straight into the injectors. JMHO. TheBac 06-13-2005, 12:41 AM Well, I wonder what it ended up being? He must've made his trip ok, though..... Tom | ||