|
: Will This Filter Fit A Standerd Cab uloadit 12-09-2009, 08:07 AM I just ordered this new racor primary fule filter kit (RK 32313 )it said it fits extended and crew cab but nothing about regular cab.does any one know if i will have a problem with this filter install on a regular cab? I am kind of puzzeld where i can mount this filter .Thank you for any info on this __________________ skleppy 12-09-2009, 11:15 AM It will probably fit, but the kit has lines and fittings that are probably configured for a crew or extended cab so you may have to do is make some new lines. Depending on where they put it on the frame of an crew or ex cab you could have to find a place to put the mounting bracket as well. I've got a CCSB so I'm sure there are holes in my frame that would not be there on a reg cab frame. drew1234567 12-09-2009, 11:45 AM Outside the frame rail. http://www.dieselplace.com/forum/showthread.php?t=68874&page=45 Or under the hood on the alternator bracket. http://www.dieselplace.com/forum/showthread.php?t=141691 uloadit 12-09-2009, 12:00 PM Thanks so much for the photos and your input.now i have some where to start dmax lover 12-10-2009, 11:24 PM It bolts inside the frame rail. I installed this kit on my old '03 extra-cab shortbed truck. It was set up for a crewcab/shorbed or crewcab/ longbed... If you have a longbed - it will probably go on per the instructions. If you have a shortbed - you might need to improvise a tad. For my old truck, I looped the fuel lines around - purchasing longer fuel line than what came in the kit... Jeff uloadit 12-21-2009, 10:31 PM This is a regular cab ,just got it in to day and wanted to post some photos so to help some one who wants to put one under the cab of the truck.it the only place it will fit ,hope this helps some uloadit 12-21-2009, 10:33 PM hope this worked uloadit 12-21-2009, 10:36 PM test uloadit 12-22-2009, 06:29 AM Ok Here We Go Got It chvydmax05 12-23-2009, 09:52 AM Should fit | ||