Does any one make a kit to lower the front diff 2 inches. My truck is leveled out and I would still like to do 4 wheel drive launches when I am racing with out lowering my t-bars. Does any one make a kit to lower the diff so the cv angle isn't affected by leveling it at bad?

Can't be done just lowering it would mess up the geometry. And you would still break stuff during launches.

What your wanting I'm pretty sure can't be done. there is 2 parts to a 4wd launch. CV angles are one but your steering won't take the stress.
Only way to accomplish this is probably the new skyjacker (I think??) 3" lift kit

The differential will hit the LCA pocket/Lower differential mount. Install a Cognito 4" system "true 4" system" This system is the correct way to do it. It is only 1" bigger that a leveled HD.

The differential will hit the LCA pocket/Lower differential mount. Install a Cognito 4" system "true 4" system" This system is the correct way to do it. It is only 1" bigger that a leveled HD.

x2!

I see that cognito has a front diff bracket will that not lower it. I find that this cant be done hard to believe. There has to be a way with all the leveled out trucks on this forum.

I see that cognito has a front diff bracket will that not lower it. I find that this cant be done hard to believe. There has to be a way with all the leveled out trucks on this forum.

You'll be better off with the 4" cognito as the CV's will be almost perfectly flat and steering link angles corrected. a 2" drop is somewhat pointless.