anyone run a roll pan on a nbs? i can't seem to find a picture of one anywhere...dunno how it'd look because of the rear of the body is recessed in for the bumper. and part 2 what about the hitch..others have said i can move it back one notch on the frame...does anyone make one where i could flip down the liscence plate and have it behind there...?

Heres a real nice one for the NNBS trucks...they need the filler plates on the side to look right just like you talked about

http://grantkustoms.com/catalog/product_info.php?cPath=4_29&products_id=498&osCsid=98b3d6dfc0c4188fff2c4523ab7cc437

heres a different one...

http://www.stillen.com/product.asp?id=SSEROLLP01&c=EX&b=Street%20Scene

pretty sure a hidden hitch will work with these, Im sure you could call and see...the biggest thing is you'll have some $$$ tied up in getting these installed and painted...

Heres a real nice one for the NNBS trucks...they need the filler plates on the side to look right just like you talked about

http://grantkustoms.com/catalog/product_info.php?cPath=4_29&products_id=498&osCsid=98b3d6dfc0c4188fff2c4523ab7cc437

heres a different one...

http://www.stillen.com/product.asp?id=SSEROLLP01&c=EX&b=Street%20Scene

pretty sure a hidden hitch will work with these, Im sure you could call and see...the biggest thing is you'll have some $$$ tied up in getting these installed and painted...i was told 100 bucks to paint...maybe i could just have a hitch made..it'd most likely be stronger than any other aftermarket

The grant Kustoms Rollpan will need to be welded with the fillers otherwise is doesnt work. Ive done 3 of these trucks.. I normally charge about 800.00 parts and labor in primer only... Painted your looking at close to 1000.00 for the Weld in one for a good job, After you put the fillers you have blend the bed sides and clear the enitre bed to do it right...

i dunno how i feel about haven that stuff welded on...i'd like to option of going back to a bumper someday