I am installing new C1, C2, And C3 along with transgo kit and the power converter lock up valve 190psi and a Yank 3 disk converter only the C3's looked tosted... the C2's looked fine. I have had the tansgo kit installed for
a some time now, I guess that saved my C2's.. I hope the new converter Valve will keep the C3's from smoking again...

The pictures are hard to make out. some more pictures are herehttp://forum.sanjuanrockcrawlers.com/index.php?act=ST&f=12&t=641
http://sanjuanrockcrawlers.com/upload/tmp/post-12-1117933726.jpg

http://sanjuanrockcrawlers.com/upload/tmp/post-12-1117933950.jpg
http://sanjuanrockcrawlers.com/upload/tmp/post-12-1117934029.jpg

Great pictures. The 3disc converter will help big time along with the valve.
mike

Your transmission adapter bracket for the engine stand look familiar........;)
.
I built mine last June for my SC-III install..............they make the job alot easier............:cool:
.
.


http://image20.webshots.com/20/3/66/30/219936630Jcpbeu_ph.jpg

yep that thing made it easy... I can't imagine trying to take it apart on the ground

You're C3's look like my C2's did. Have fun with the rebuild.

i like the banner in the background, were you in it?

Great pictures. How do your C4's look? When looking at mine the C1,C2,C5 were perfect, but C3 looked just like yours and C4's were a little worse.

Nice to see someone else taking on the job in the garage.

Rob

i like the banner in the background, were you in it?

I was an alternate last year but never got in.:( Thats my friends shop, he helps out the mag. every year. :D

Great pictures. How do your C4's look? When looking at mine the C1,C2,C5 were perfect, but C3 looked just like yours and C4's were a little worse.

Nice to see someone else taking on the job in the garage.

Rob

I didn't check them I expected to only find the C2's burn (but they looked fine) I had limped it a couple of times in overdrive. Now after seeing the C3's and what you said I wish I had ordered C4's. I only ordered C1,C2,C3's

I have to have the truck on the road buy tuesday. Or the wife will killl me:D

I finished it up and took it out and tested it with a 40,000 lbs Mixer loaded with Gravel up a good incline

http://sanjuanrockcrawlers.com/upload/tmp/post-12-1118287538.jpg

http://sanjuanrockcrawlers.com/upload/tmp/post-12-1118287555.jpg
http://sanjuanrockcrawlers.com/upload/tmp/post-12-1118287571.jpg
http://sanjuanrockcrawlers.com/upload/tmp/post-12-1118287615.jpg
http://sanjuanrockcrawlers.com/upload/tmp/post-12-1118287599.jpg

nice tow !

holy smokes, that is a nice tow!!! wil

Nice job. I would have been worried about that tow strap. I knew these trucks were tough.

GM should put these pics in a commercial.:lol:

IMO you need to add something about the cement mixer towing to your sig along with the rice eater.

Sweeeet pull. What kind of converter is that? How'ed the install go?

Rob

Sweeeet pull. What kind of converter is that? How'ed the install go?

RobYank converter. dave

Yank converter. dave
Are they building a converter especially for diesel truck apps, and what is the price. I looked on there website but counldn't find info on a diesel applications.

thanks,
Rob

Yes they are Tbyrne motorsports has it listed he's a vendor here $1089.00. dave

Is yank anygood. dave

Very nice pull, Not trying to Hijack just curious how the TTC is going. I noticed that is the hill climb. I was there for memorial and noticed there were getting ready for it.

Going great can't tell you any more than that... :cool: only 3 of the 10 trucks pulled farther than my pull ):h I just don't have the traction. We were just testing the pull out:D

Is yank anygood. dave

It seems to work great...( don't have much time on it yet) very stong lock up and seems to be just a little under the stock stall...