hey guys im thinking of putting a dual pillar gauge mount in my truck. i already have the overhead mount with a pyro and boost gauge. i was thinking of putting a fuel pressure gauge in. what other gauges would i need? i dont have a lift pump currently but am looking into getting one. i kinda want the gauges just cuz the look but also i want em so i can monitor my truck. any help would work. thanks

May be an oil pressure or an ect gauge. The factory one are off at times from what I have . More so the ect on am 05 model anyway

anyone else

get the pump first then get a fuel press, and a rail press gauge

ok. just curious whats the differnece? sorry if its a dumb question

whats the difference in the gauges? 1 fuel pressure gauge is a low pressure it will tell u the pressure going to the CP3, u never want more then 20psi at the most going to the cp3. 2 a fuel rail pressure gauge tells u the pressure is inside the fuel rail it ranges from 1,000psi to almost 30,000psi at wot,

what would be the diffference in getting th pump b4 the gauge, well if u install a fuel rail gauge now then get a pump and a gauge later down the road u have to tear the a piller apart again to wire up the second gauge, unless u were to hook up 90% of fuel pressure gauge and then just plug it in when u get the lift pump, or try to do it all at once if u can

ok cool. thanks i think thats what i'll do. i was curious on the difference between the 2 gauges. you answered em for me thanks

tranny, oil, diff temp, pyro, boost, fuel pressure, air pressure. thats what ill be running eventually

hmmm forgot bout the diff temp maybe i'll get the triple pillar pod and put the 2 fuel pressure gauges and the diff temp

the more gauges the better :)

lol ya looks cool to