I need new rotors on the front of my truck these ones are shot after only 20k. They just rust out on me every time. I talked to napa and they said they where about $360 each. Is that just how much they are? Also does any body know are they a 5 bolt 10 blot are are they just an 8 bolt? I have not actually had time to take them off yet so have not verified for my self. Thanks!

I just had my rotors replaced and got at dealer for $120 and change each thee dealer had them in stock. If remenber they had 5 bolts with lock tite on them had to replace one bolt dealer did not have these.Also had to remoe sensor wheelfor abs should of index it before removal.

Front ones on fleabay, for price and part number info http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=160363325859&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=e3663f811220a0e20392dbb2fe4092e4&rvr_id=&ua=WXI8&itemid=160363325859

It would appear as if the OE number is 88936163 for the 5 hole, but I would still verify. There are 5 and 10 hole rotors, so confirmation is necessary.
$160-$190 list at Napa.

Looks like I will have to take them off to be sure about the bolt pattern. NAPA must be looking up the wrong rotors then. Hope fully that's it. $190 sounds a loot better than $360.

FYI for others
Bolt patten refers to the bolts that hold the rotor to the hub not the wheel lug bolts

This was common issue in terminology on the rears were parts suppliers say
10 bolt

If its not raining out tomorrow im going to take the rotors off. Do I need any special tools? Looks fairly simple just remove wheel and tire caliper and pads then take the cover off of the 4x4 hub. Then I assume that there is a retaining nut of some kind? Sound right to anybody?