|
: how do you pull the tunes in your truck off it? braaap11889 11-03-2009, 06:23 PM Like the title says I want to see what the exact tunes in my truck are. Can I do this even though I dont have controller with my current license on it ? But I do have a efilive controller. bballer182 11-03-2009, 06:50 PM Yes, you can do it. Hook up EFI Live like you were going to "tune/flash" the truck but instead of hitting one of the red arrows to flash press the green arrow to read the tune and save it when you are done. It's that easy. thefermanator 11-03-2009, 06:52 PM If you have a V2 you can read the tunes out of it without using a license provided the tunes are not locked. Tanc Crusher 11-03-2009, 06:52 PM I assume you mean read tunes off ECM and TCM without using a license? But one thing If you have the Flashscan V1 then it cannot read new 2006 or newer ECM or TCM since they use CanBus OBDII inteface. If you have the Flashscan V2 you are covered to read any that EFILive has mapped. Brian Tanc Crusher 11-03-2009, 06:53 PM Since you mention V2 which you can read any tune without a license. Does a V1 have to lock before you can read one? Also you can read tunes not locked or are DSP2 or DSP5. Brian braaap11889 11-03-2009, 07:25 PM Found it thanks guy EFI Support 11-03-2009, 08:55 PM Since you mention V2 which you can read any tune without a license. Does a V1 have to lock before you can read one? Also you can read tunes not locked or are DSP2 or DSP5. Brian You don't need to license before reading with V1. While you can read unlocked tunes, you cannot read out DSP for Bosch because we use ECM memory external to where standard tune are flashed. Cheers Cindy | ||