Okay what am I missing here.

I went out tonight and did a few runs BB logging TCM pids. and also did a few runs BB Logging ECM pids. My issue is only the ECM pids saved. I thought maybe since I switched to ECM after TCM stuff maybe it just wrote over it or something. Nope that wasnt the issue. After I BB Log an ECM run it shows saving file. Doesnt do that with the TCM logs. I can view the TCM pids as they are recording but nothing is saving so I cant view on my laptop after words. Is there something Im missing or is this a known issue.

I just updated to BB Logging not long ago so im just starting to play with it. I searched here and on EFI and couldnt find my answer.

Thanks

Well went and tested. I can log straight only ECM select and it saves. I can log straight only TCM selected and it saves. Also a mix of both ECM and TCM and it saves. Now the test were only like 2 to 3 minutes. But did like 12 of them and all saved and tried different orders of them. My thought is maybe you have a PID that is selected and not valid but the Flashscan should error out and tell you that.

Brian

Brian

Thanks Brian,
I was actually just about to go out to the truck with V2 and Laptop and see if I can mess around with it. I might have just missed something last night, IDK
We'll see if I can get it figured out. I just thought it was weird that it didnt show the saving like it did when I did ECM logging


**Just got back in from messing with it. It was allowing logging with pids selected in the TCM logging that it wouldnt allow durring a TCM-ECM mix log. I took out those pids and retried and works fine now. It only gave me the error message durring the Mix Log though. Weird. Its working now though.
Now I just need to add some more pids to my dashboard to view everything**

Glad you got it working. I know what a pain to setup a PID list and have one that is not recognized. I think in the future they may bypass non working PIDs and continue on to logging options.

Brian

Have you been able to get the Gear Pid to show up. I can log it and it shows on the BB logging tool option. I have it selected in the Pid list under scan tool. But cant find the guage nor change properties to find it either. HMMMMMmmmmmmm