can anyone help me out finding the right wires on an o7 classic.

the instructions say to look for a light blue with black stripe wire to tap into, thou once i looked at all wires, there isnt one, just blue,/ also on passenger side, there are only two wires orange and yellow, and i need a green one/?

well ive made it back.. found out that the only one wire which had been extra(not extra if you own a club cab) stays away..ie only cc models use this wire, so i took it off and hoorah! anyways somthin else came up with the passenger side wire rouet placing; the instructions say to zip tie the wires to the back motor which for some reasen, still cant figure it out has to be in theback(drivers side says to mount motor near the front closest to the enging...) well when you look under the truck for ziptin', aint no ziptie gonna go around the whole f--k= frame rail!:eek: just put some brown glue and tucked it beneath the rail and iam gonna check this out in the mornin to see if she;ll hold. this brown glues called 100percent polyurethane construction adhesive...blah blah blah sh-9 works thou well on my fingers like crazy glue so ill leave her at that.;)

Glad to see it worked out for ya. I've been looking for an install write up myself for a few months. All I found was a video install on an F150. A search on here didn't find any DIY write ups either.

Congrats on your install!

Bill