tarkstoyz
09-14-2009, 11:22 PM
Having problems with the tow-in of my tires when dragracing.Will this sop the tow-in? How does the centerlink perform when normal driving/towing?
Will it wear my tires quicker? THX
Will it wear my tires quicker? THX
|
: PPE centerlink what do you think? AlligatorPerformance 09-14-2009, 11:31 PM Having problems with the tow-in of my tires when dragracing.Will this sop the tow-in? How does the centerlink perform when normal driving/towing? Will it wear my tires quicker? THX It will alleviate most of the tow in when you race, you still need to lower the t-bars though for the best results. As far as daily driving, several of my customers run them daily, they just say it cuts the turning radius down about 3'. Other than that, you could end up with some more cupping if you do alot of sharp turns etc... tarkstoyz 09-14-2009, 11:43 PM what do you suggest? Just the braces or centerlink for the longivity of the front end and tires? AlligatorPerformance 09-14-2009, 11:45 PM That's all that I run, 65K on mine with no slop;and as long as my bars are dropped all the way down, I launch straight as an arrow. tarkstoyz 09-14-2009, 11:52 PM pm coming your way AlligatorPerformance 09-15-2009, 12:01 AM PM returned. tarkstoyz 09-16-2009, 01:53 AM AP(CHAD) your everywhere MAN!!!! AlligatorPerformance 09-16-2009, 02:33 AM Yup :D c55asleep 09-17-2009, 11:24 PM AP(CHAD) your everywhere MAN!!!! Great to deal with. tarkstoyz 09-18-2009, 08:07 PM Chad, finally got the pit&id braces on today, had it aligned and also did the washer trick so when at the track i can back the tbars down and when finished put them back where they were. If it holds maybe a 10.5???? AlligatorPerformance 09-18-2009, 08:14 PM Glad you got them. Good luck! tarkstoyz 09-20-2009, 03:10 PM Well the pit and Idler, worked Awesome!!!! The most rpm that i left at was 1900 and had a personal best of 60ft 1.75 1/8th 8.2 1000ft 10.61 in search of 10.5 next time!!! (Yes, this is the longest track we have around here!) I might be in the 12's in the 1/4? don't know? For the 3rd time at the track, not to bad! AlligatorPerformance 09-20-2009, 04:37 PM Sweet 60' that's what I run with my truck. Glad it worked out man. jrad12381 09-20-2009, 05:02 PM What is this washer trick, and what is the purpose of it? tarkstoyz 09-20-2009, 10:27 PM I learned this trick from here just reading how to drag race. When lowering the front of your truck for racing( AND I DON'T THINK U DO! LOL) see how many washers will fit between the bolt head and the keys so after racing you can just zip it back into place with out any guess work or counting turns. | ||