|
mpl897 12-26-2003, 03:51 PM I SEEM TO HAVE NOISEY PULLY(S)CHIRPING SOUND, EVER HERE OF THIS ON A NEW TRUCK? DO IDLE PULLYS GO BAD THAT QUICKLYhttp://www.dieselplace.com/forum/smileys/Confused.gif Mackin 12-26-2003, 04:08 PM If your talking about the shut down chirp ... It's just the belt "chirping" when the high compression engine comes to a screatching halt and the belt slips a bit.. They all do it .... Mac http://www.dieselplace.com/forum/smileys/Approve.gif mpl897 12-26-2003, 05:33 PM NO IT'S WHILE IDLEING, ESP- NOTICE IT 1ST START W/ COLD MOTOR. dmaxalliTech 12-26-2003, 05:53 PM sounds like a belt to me....see quite a bit of that. CMDMAX 12-26-2003, 08:08 PM I had the same problem. Took it to the dealer and he replaced the belt. Problem fixed. jeephauler 12-26-2003, 08:15 PM Same problem, put a new belt on, carry the old one as a spare. 1822 12-27-2003, 06:37 AM Same problem, look up - Cold Start Belt Squeak. Mine turned out to be the water pump at 12,000 miles. Ltrain 12-27-2003, 10:30 AM My truck does the same thing, maybe i should go have a new one put on. Diesel Nub 12-27-2003, 10:37 AM Same problem ... solution new belt mpl897 12-27-2003, 04:05 PM I put belt dressing on, unfortunatly while running, (i had a mental block)and did not seem to matter, although today seemed to lessen. going to monitor noise and let you all know.http://www.dieselplace.com/forum/smileys/Clap.gif Frank Blum 12-28-2003, 11:20 PM I have used Permatex spray belt dressing since 89. It has been 100% effective. It makes the belt tacky but will not collect dirt. Try it before buying a new belt. Later! Frank | ||