I am running 285/70/17 toyo open coutry at's on 17x9 helo maxx 8's . They rub the back bottem of the fender when i turn almost all the way either left or right. The more I turn the worst it gets. I have the t-bars cranked up 8 full turns. What do I need to do to stop them from rubbing? I still can go a few more turns. Or do you guys think spacers will work? I dont have the money right now for a lift but I am looking at the cognito leveling kit. Dont really want to if I don't have to . Any suggestions will help thanks

behind the left fenderliner is the E-brake cable. You should be able to zip tie that away from the liner to get a little extra space. That might help a little at least on full lock left turns.

I'm running H2's. I drilled small pairs of holes and ziptied the wheel wells back where needed (also the ebrake cable).

Dan <><

Remove the bottom clips on the liner, heat it up with a heat gun and tuck the liner behind the lower lip of the fender sheetmetal, it gives you a little more space. If needed, use a rubber mallet to curl the metal lip back a tad more.