Here's the question.... have everything installed, except for the hot

wire from the fog lights. If I understand it right ... it goes to the D6

terminal. What and where is the d6 terminal. I think this is on the power

fuse block located under the hood. But am unsure how to find it.

I would be thankful for any Help.

Thanks
:help: can some scan a picture

what year truck? my 03 was all pre-wired


Here's the question.... have everything installed, except for the hot

wire from the fog lights. If I understand it right ... it goes to the D6

terminal. What and where is the d6 terminal. I think this is on the power

fuse block located under the hood. But am unsure how to find it.

I would be thankful for any Help.

Thanks
:help: can some scan a picture

it's on 03 chevy, it's not pre wired. have looked. Have had friends look.
The Dealer even looked. The kit I got had been opened.
Thought someone could shine a little light on the connection.
Thanks

my wires were on top of the frame tied to anouther wire harness. but I do not know where to tell you to look for the D6 spot.

If You Go Under The Fuse Block In The Engine Compartment, It Will Be A Wire Block That You Have To Unscrew And Plug The Wire Right Into The Block If You Are Using A Gm Package.

Thanks Guy's

It plugs in next to a red wire in the green wire connector.
Everything works great.
Did not have to program my bcm.
Thanks Again
Pwerdmax