Manual high idle connector pin

Anyone have the pins used to add the wire to the ECM to use the PTO function for High Idle on an LLY??

If wanting the Pin model number from dealer check this post.
http://www.dieselplace.com/forum/showthread.php?t=27931&highlight=15356826

Brian

thanks. I'd found that same p/n in a different thread and the dealer says that part number has never existed in GM's system. they said I'd have to buy the entire harness to get the pins.
However, the thread you linked is one I didn't find, and it has a link to someone who does have them. So, I appreciate you posting that link up.

No that is not the case. The number may have changed. I have to look for another thread on this. But the LB7 is bigger than LLY. There is like 19 trays and there is another box that has other pins in it that should be in the 1-19 trays. I needed pins for my LMM and they did not find it in tray 19 for mine but found a cardboard box of addtional things that should be place in the other trays. i am unsure if there are new numbers to replace them. I will look around.

Brian

Over at Duramax Diesel Forum I remembered a post there.
http://www.duramaxdiesels.com/forum/showthread.php?t=14409&highlight=pin

LLY- (pn-15356827)
LB7- pn(12084912)

Like I said there was a small cardboard box at my dealer that had items that belonged in the other trays. I dont know a tray number though but these post list possible an old number and which tray they are in. So maybe still in that tray but under a different number.
http://www.dieselplace.com/forum/showthread.php?t=169299&highlight=lly+pin+tray
http://www.dieselplace.com/forum/showthread.php?t=122024&highlight=lly+pin+tray

They just aren't in the computer as parts to sale. used for service dept. So I say .50 to $1.00 at the most. Hope this helps you find them. Let me know how it goes.

Brian