straightpiperoar
08-05-2009, 10:02 PM
Just wondering if anyone has taken a cp3 apart and put it back together without any or not to many problems????
|
dmaxvaz 08-05-2009, 10:49 PM i wouldnt try it, too many things that have to line up to put it back together. been there done that and i had to have superdiesel walk me through it on the phone Josh2002cc 08-05-2009, 10:52 PM I would leave that job for someone who knows what is going on. Tolerances are tight and the parts can be small and tricky to put back in the correct place the correct way. Whats on your mind for the CP3 once you get it apart? JST 08-05-2009, 11:33 PM Just wondering if anyone has taken a cp3 apart and put it back together without any or not to many problems????Did 3 so far,the one in my truck has a 155,000 miles on it and running good LBZrcks 08-05-2009, 11:37 PM You might find some info between these two threads. http://www.duramaxdiesels.com/forum/showthread.php?t=11050 http://www.duramaxdiesels.com/forum/showthread.php?t=10984 straightpiperoar 08-06-2009, 08:50 PM I would leave that job for someone who knows what is going on. Tolerances are tight and the parts can be small and tricky to put back in the correct place the correct way. Whats on your mind for the CP3 once you get it apart? Going to polish part of it and powder coat the other. Josh2002cc 08-06-2009, 08:57 PM Powder coat a part on the inside or the outside of the CP3? Also, not doubting you but do you realize what could happen if you miss something or if you put the smallest part in the wrong way? straightpiperoar 08-06-2009, 09:05 PM The outside cover...I took it to a shop that rebuilds pumps and they are looking at it...I was just wondering what the inside of them looks like.Want to make the dual cp3 match my turbo tarkstoyz 08-06-2009, 10:03 PM call nick @ Duramaxtuner he has done this before. emiller3 08-06-2009, 11:12 PM Thinking about it. | ||