I am 6'8" tall and weigh 340. I want a set of nerf bars that will hold my big azz and not rust out in 4 years. Any suggestions, I am a dealer for Dee Zee, Go Rhino, N-Fab, Westin, and most others so I can get most anything. I like the N- Fab but do not want to drill into my body seams. Any experience with the platinum series westins?

Thanks

N-Fab seem to be the best ones I have used. I am a big guy myself 6'1, 275 and I never had any issues with them bending or anything. Good luck..

I have westin platinum series. I have a friend that comes in at 410 and another friend that is 280. They were getting in the truck and before I could say anything to them both were getting in the truck at the same time wwwwwwooooo. I was supprised to see that the nurf bars held up fine. They have a center support that helps out and bolt to the frame without drilling. No problems

Thanks, i am looking at the Platinum series and also the 4" Putco bars. Not too much out there on the Putco bars yet. I just want something beefy. The 3" just look lost on a CC/SB.

One of the guys I work with is a big guy and he likes his Westins I don't know if there the Platinum series or not.

I also have the Westin Platinum Series and couldn't be happier with them.

here is my nurf bars
what do you guys think of my truck (pic) (http://dieselplace.com/forum/showthread.php?t=23053)

Thanks for all the input, put the Westin Platinums on today, great fit and strong too, only problem is I stripped the F'N bolt for the center support on the drivers side goint into the tube!!!!! Sumbiatch!!!!