I just purchased Trippin's overhead gauge mount, but I am a little skeptical on how it will look once installed. The way my overhead console is shaped seems to point the gauges slightly on the down side. I looked around on the site and it seems the later model trucks have a more angled overhead console. Does anyone have any pics of 2001 to 2002 MY trucks with the mount installed? Thanks.

im are like you say as well as with a few others. i just learned that if i put my bost guage in the left hole (60 psi guage) and my pyro on the right (1600 degree gauge) i can almost see all the numbers that the needle goes too

im are like you say as well as with a few others. i just learned that if i put my bost guage in the left hole (60 psi guage) and my pyro on the right (1600 degree gauge) i can almost see all the numbers that the needle goes too

Glad to hear I am not the only one. Do you have the full length console or the shorty? I have the full length. Thanks for the reply. Do you have pics of the gauges from a drivers point of view? Very sweet rig by the way!! Thanks.

Have you looked at the installation guide Brandon put together when he installed his? It has a few picks that may help. Here (http://www.dieselplace.com/forum/showthread.php?t=21492) is the link to the thread, and here (http://www.bmdmax.com/Gauges.html.0.html) is a link to Brandon's write-up directly.

i had the same problem with my gauges i just installed angled gauge rings from summit/jegs.sorry no pics.

i had the same problem with my gauges i just installed angled gauge rings from summit/jegs.sorry no pics.

Nice idea. I am considering modifying my console to angle the mount a little better. My Wife is at the right seat height but I'm 6'3". I have to duck a little to see them.

BBDC may be 6'3" but it is all head... His actual body is 5'.... LOL:D