TigerFan822
06-30-2009, 06:49 PM
I'm trying to setup my V2 for my DSP5 tunes so I don't have to use the DSP5 switch. When I copy my config files over then go to select PIDS, my config files don't show up. Anybody know what I'm doing wrong?
|
EFI Support 07-01-2009, 07:35 PM Have you followed the DSP Upgrade document? http://download2.efilive.com/Tutorials/PDF/DSP%20Upgrade%20Tutorial%20-%20Rev2.pdf Take a look from page 20. Cheers Cindy TigerFan822 07-01-2009, 07:51 PM Have you followed the DSP Upgrade document? http://download2.efilive.com/Tutorials/PDF/DSP%20Upgrade%20Tutorial%20-%20Rev2.pdf Take a look from page 20. Cheers Cindy That's what I've been going off of. I followed all the instructions, I've even re-done it several times and it still doesn't load on my flashscan. TigerFan822 07-03-2009, 04:02 PM Got it figured out. Thanks. One more question. How do I know which tune is which? Tanc Crusher 07-03-2009, 05:40 PM From the default options.txt file you have this Stock Tune = Stock Tune Smokeless = DSP tune 1 Economy = DSP tune 2 Power = DPS tune 3 Towing = DSP tune 4 You can change the names to any thing you wish as long as under 16 characters. Brian killerbee 07-06-2009, 06:49 PM Don't forget to failsafe. Always assume what you will do if the dsp switch is pulled out or is disabled. | ||