|
TooDamnLong 06-23-2009, 06:25 PM hay guys i bought the truck awhile ago and it came without this plugged in... i have tried 2 find the plug with no luck.. hopefully you guys can tell me what this does http://i60.photobucket.com/albums/h7/Andysxtc/06230917181.jpg greif03lb7 06-23-2009, 06:30 PM Is that the mafs It looks like it TooDamnLong 06-23-2009, 06:32 PM umm... thats probly not good then that it has no connector... greif03lb7 06-23-2009, 06:35 PM Does the truck run ok? is there a ses light on? I always heard if that is going bad it will cause problems let along being unpluged. Im more familiar with the lb7s but that is your intake right? Tanc Crusher 06-23-2009, 07:03 PM Actually MAP sensor. Brian Tanc Crusher 06-23-2009, 07:10 PM But I think it is part of this. Looks like your MAP sensor is the right in the picture. The 3 wire connector. I say the owner moves it to the normal one in warm weather. In freezing snow I say the owner may have moved it to the other location. http://www.dieselplace.com/forum/showthread.php?t=203657&highlight=disconnect+map+sensor Brian smokin07 06-23-2009, 07:37 PM yeah my truck has the same thing. they moved mine to the other location cause it was freezin up also. nothin wrong nor is it a problem. TooDamnLong 06-23-2009, 09:57 PM alright cool guys thanks alot ive had alot of people tell me i should have a sensor there... and i also drove 2 a buddys and took at look around in there and realized that it was just moved not removed.. thanks again for the help on it but like you said that u move it.. does it really matter? can u leave it in the "cold weather" spot all year? or would u not suggest it? Andy Tanc Crusher 06-23-2009, 10:27 PM I see no problem leaving where it is. My guess they use a new MAF for the new location because they have no dummy block plate to go in its place. Just a guess as to what they do for this fix. Never done it myself. Brian fish91 06-23-2009, 10:44 PM That is the Map sensor mine has frozen a few times in winter. How does that help by moving it? Tanc Crusher 06-23-2009, 11:59 PM Just in a warmer location I guess and condensation may not be as big of an issue. Have not read through the link in post #6 i posted but it might explain it. Brian greif03lb7 06-24-2009, 01:43 AM Actually MAP sensor. Brian Thats what I ment I guess:o: | ||