duramaxpig
06-21-2009, 10:52 AM
Does any body know why people say to do the ice pick trick? i had # 2 injector conector go out and know i am freaked out about # 7 going out. lly motor 05. any help
|
azduramax04 06-21-2009, 11:51 AM This has been covered hundreds of times. Do a search on it, days of good reading. You do it to re seat or re crimp the connector so you aren't stuck on the side of the road. duramaxpig 06-21-2009, 01:29 PM Nice Rail, Thanks i will check it out turtle 06-22-2009, 11:55 AM Here's why, too, to avoid this situation. http://www.dieselplace.com/forum/showthread.php?t=315737 I gotta get my #7 done!! grandpa truck 06-22-2009, 12:18 PM Would'nt you want to clean it up real good and plug and unplug a few times to make a better contact. Ice picking sounds like just pushing the contacts tighter together. Cleaning should give the same results???:D A_T_Ver 06-22-2009, 12:56 PM Would'nt you want to clean it up real good and plug and unplug a few times to make a better contact. Ice picking sounds like just pushing the contacts tighter together. Cleaning should give the same results???:D Yeah, pushing the contacts tighter is what you want. They're on there rattling around and get spread apart not making good contact. Cleaning would be a plus though. pgreen 06-22-2009, 04:01 PM Pig - The ice pick saved my a$$ last night. :) azduramax04 06-23-2009, 02:03 AM cleaning doesnt do it..... You have to FORCE the connections tighter.... Trust me. Been there. rwmedl2 06-26-2009, 12:55 PM Does anyone have a picture of injector #7. Im not sure where it is? Thanks. not-bob 06-26-2009, 01:56 PM No Pic, but Facing the engine, it's on the left hand side, last Injector. Stand at the passenger side fender and you can see it. azduramax04 06-26-2009, 02:01 PM There are pics in the DIY section. azduramax04 06-26-2009, 02:02 PM http://www.dieselplace.com/forum/showthread.php?t=142114&highlight=icepick | ||