jeff1216
05-03-2005, 09:07 PM
straight piped...predator....finger stick and block off plate.....have code p0046....anything to worry about?
|
briano 05-04-2005, 05:50 AM I'm curious now.. I've never even heard of that code..and can't find it either. You sure you read it correctly? NCMIC 05-04-2005, 08:08 AM i can't find that code, could you go back and recheck it? jeff1216 05-04-2005, 04:05 PM Just plugged in my predator.......the original code is gone and is now replaced with P0671 Any thoughts? LarryJewell 05-04-2005, 04:17 PM P0670 Is The Glow Plu Module, Maybe Your Code Is Something To Do With The Glow Plugs skoryaro2 05-04-2005, 05:26 PM Prolly a dumb question, but with the Predator are you reading just the DTC's or the (I forget how it's worded), but the DTC's "not ran"? Hope you know what I mean - if not I'll have to plug 'er in and give specifics. cid` 05-04-2005, 05:56 PM I've gotten the P0046 myself a few times, no idea what it is either.. GMCSID 05-04-2005, 08:10 PM P0046 sets when the turbo vanes position doesn't match the desired position. The most likely causes for turbo vane position codes are debris in the solenoid control valve, inoperative solenoid control valve, sticking turbo vanes, or an operative turbo vane position sensor. P0671 is an open or short in glowplug #1 circuit for less that 1 second. jeff1216 05-04-2005, 10:14 PM P0046 sets when the turbo vanes position doesn't match the desired position. The most likely causes for turbo vane position codes are debris in the solenoid control valve, inoperative solenoid control valve, sticking turbo vanes, or an operative turbo vane position sensor. P0671 is an open or short in glowplug #1 circuit for less that 1 second. Sooooo....anything I need to worry about? P0046 code is now gone..........P0671 is still there though I hate to take the truck to the dealer with the few mods I have ....they are real PRICKS Bubbba 05-04-2005, 10:48 PM P0671 Glow Plug/Heater Cylinder 1 | ||