Anyone running just the Juice on an LLY?

Anyone running the Juice/*** without the Pyro hooked up. (I have autometer guages)

so no one is doing this????

turbo lcc,

Your just not beening seen by the right owners, we sell Juices all the time without the Attitude. You don't get as much HP but it works great and customers like it etc. We also have the van Aaken's, predators and Superchips for the LLY and LB7's for those that have gauges already.

Mark @ DPPI

turbo,

I am running the Juice w/Attitude and the pyro. Not having the pyro is a bit risky if you tow but otherwise should be no issues. FYI...I also have the autometer gages. I had them first because I didn't think I was going to get the Juice but then couldn't control myself ;) . The good thing is that you can run them both off the same pyro with no ill effects to the readings. I talked with several others who have done it and I then tried it with each one individually and the readings were all the same. This also helps with a cover story when you take the Juice off to go to the stealer and have the pyro hooked to a gage :) .

turbo,

I am running the Juice w/Attitude and the pyro. Not having the pyro is a bit risky if you tow but otherwise should be no issues. FYI...I also have the autometer gages. I had them first because I didn't think I was going to get the Juice but then couldn't control myself ;) . The good thing is that you can run them both off the same pyro with no ill effects to the readings. I talked with several others who have done it and I then tried it with each one individually and the readings were all the same. This also helps with a cover story when you take the Juice off to go to the stealer and have the pyro hooked to a gage :) .
So which probe did you use the autometer one or the Edge one?

I used the Edge one b/c it had a much longer lead and made it easier to get to when taking the edge off. I asked the Edge guys and they even said it was manufactured by the same company that makes the Autometer probes.