|
: Stacking the Bullydog Power Pup With Dyno Dominator duramaxdiesel 05-02-2005, 04:35 PM A quick question. My buddy bought this stack and it's really not working out for him. If he puts both the Power Pup and Dominator on max levels it appears that the truck does not pull as well as it does when he stacks at lower levels. I thought that these two programs would work well together seeing that they are both from the same company. Also, his truck is an LLY. Any advice guys? Thanks. Nick ob_1jr 05-02-2005, 06:29 PM That could be because of transmission slip. Has he had a transmission upgrade? Other than that, there are more experienced people on this subject. They will chime in here soon. Max Power 05-02-2005, 06:56 PM It's not always best to run both of your power adders in the high setting. Try different combinations. Some will stack better then other. powerhousedmax 05-02-2005, 07:22 PM i was running the power pup with the 150 download without timing, and the dyno dominator with the 210hp program but the 210 took a Censored on me and i am waiting on bullydog to warranty it out. Have since put on the edge with attitude to get by (i work at a performance shop that my brother owns so "borrowed it" and justified it as "testing and tuning") I get very bad bursting some days and no bursting the next. some days it runs good and others it doesn't, its harder to understand than a woman. The 210 program ran very good for the day it worked after i got my trans, but started it up the next morning and wouldn't run well, just hopped around. I guess what i am getting at is the timing on the downloader may not work so well with the timing on the dyno dominator-too much. He may try to get bullydog to reprogam him one with the timing taken out. Just a thought. Got Juice? 05-02-2005, 07:24 PM The D Dominator is at the edge of timing advance. It has never stacked well with anything other than a duramaximizer. The pup will stack with almost any other CANBUS inline module hdmax 05-03-2005, 11:16 AM Stacking programmers from the same manufacture may not be the best stack due to the fact they most likely use the same way of getting the power. IE: timing! Just a thought! A quick question. My buddy bought this stack and it's really not working out for him. If he puts both the Power Pup and Dominator on max levels it appears that the truck does not pull as well as it does when he stacks at lower levels. I thought that these two programs would work well together seeing that they are both from the same company. Also, his truck is an LLY. Any advice guys? Thanks. Nick | ||