|
fasteddie 04-30-2005, 10:28 PM Hi Guys has anyone installed bd turbo timer on 2003 the information and location is not very good that comes with the kit I like to install before weeken is over if not I will phone them on monday:eek: noreaster 04-30-2005, 10:31 PM i have a valet remote start, it has a turbo timer on it kill 2 birds with one stone. send it back Max Power 04-30-2005, 10:39 PM I've never installed one but I am sure I can help you figure it out. What do you need to know? Max Power 04-30-2005, 10:41 PM Tell me what it has for inputs/outputs and I will help you wire it up. fasteddie 04-30-2005, 11:43 PM Tell me what it has for inputs/outputs and I will help you wire it up.Ok the information that came with this is very poor. On the Duramax Connector Pinouts it says blue wire for ignition connector C201 - white 17 goes to pin A1 Green wire goes to ignition connector C201-brown 41 goes to pin A13 Tan wire goes ignition connector C201-Pink 139 goes to A2 Pink wire goes to ignition connector C201 - red 242 goes to pin B1 I don't think I am looking at the right area. It shows a picture of the Duramax Connector Pinouts but need help finding the location for this Max Power 05-01-2005, 12:16 AM I would assume they want you to hook it up under the dash. All the ignion wires you need will be here. http://www.rathwellhardware.com/install/pages/truck%20062_jpg.htm Your wiring colors are hard to follow. fasteddie 05-01-2005, 12:38 AM I would assume they want you to hook it up under the dash. All the ignion wires you need will be here. http://www.rathwellhardware.com/install/pages/truck%20062_jpg.htm Your wiring colors are hard to follow. Ok I increase the picture on the information and its shows that there are a (17 a pin) and on 2003 its has (12 a pin) and differance color I guess I will have to phone them fasteddie 05-01-2005, 11:51 AM I would assume they want you to hook it up under the dash. All the ignion wires you need will be here. http://www.rathwellhardware.com/install/pages/truck%20062_jpg.htm Your wiring colors are hard to follow. Do you know where I can find the wiring code for it:ro) Max Power 05-01-2005, 11:53 AM Red - Power Pink - ign1 Orange - Ign2 White - Ign 3 That's all you need as far as ignion wires. fasteddie 05-01-2005, 03:15 PM Red - Power Pink - ign1 Orange - Ign2 White - Ign 3 That's all you need as far as ignion wires. Hi again one wire is needed for keep alive and needs towire to--- (ECM power wire )what the ecm stand for and wired to white? thank you for your time Max Power 05-01-2005, 03:51 PM I don't quite understand what you are getting at. If you have all of those wires I listed powered up the truck will run perfect. | ||